EPROM platform presentation: additive manufacturing and material health
Research
On-site
24 January
On January 24, the Centre des Matériaux de Mines Paris – PSL is pleased to invite you to a day of discussions on the EPROM 2025 platform – “Manufacturing, research, training in the Paris Region”.
This platform of excellence, dedicated to additive manufacturing, will feature unique WLAM (Wire Laser Additive Manufacturing) experimental equipment for the manufacture of large-scale structural parts, coupled with a “health-materials” approach.
EPROM 2025 will specifically address the needs of the aerospace and defense industries. It will be available to all companies from autumn 2025.
This initiative is supported by the Yvelines department, the Île-de-France region, Bpifrance, the AsTech competitiveness cluster and the M.I.N.E.S. Carnot institute.
Program
Morning
- 9:00 am: Introduction | Sylvain Dépinoy, Centre des Matériaux Mines Paris – PSL
- 9h10 : Metal BinderJetting: Combining dimensional precision and material health | Agnès Schnell, PhD student at CMAT- JPB système
- 9:40 a.m.: Screening of “Cold Spray acier 316L” | Emmanuelle Schoener, EDF R&D
- 10h10: In-situ laser preheating and microstructure of an IN738LC obtained by L-PBF | Mathieu Assainte, PhD student at CMAT – Safran SAMC
- 10h40 : Accelerating New Space developments through additive manufacturing | Luc Lacoste, Sirius Space Service
- 11h10 : The EPROM 2025 project | Elisa Borges Mendonça, Centre des Matériaux Mines Paris – PSL
- 11h40 : WLAM investments – Jean-Dominique Bartout, Centre des Matériaux Mines Paris – PSL
Networking lunch : 12:30 pm to 1:30 pm
Afternoon : Full tour of the platform from 1:30 to 2:30 p.m.
Practical information
- Jan. 24, 2025, 8:30 am
- Center des Matériaux | Mines Paris – PSL 63 Rue Henri Auguste Desbruères 91100 Corbeil-Essonnes
This project was supported by France 2030 and the Ile-de-France Region.
