Siegfried Fouvry

‹ Back to the directory

Publication(s)

2026
Experimental and modelling investigation of fretting fatigue in crossed steel wire contacts: Influence of corrosive seawater and zinc cathodic protection DOI : 10.1016/j.triboint.2026.112253
2026
Fracture toughness of fretting obtained TTS in Ti-6Al-4V by in situ notched beam test DOI : 10.1016/j.triboint.2025.111108
2026
Fretting Wear of a 304L stainless steel in 200-bar pressurized hydrogen: A typical nodular third body structure DOI : 10.1016/j.wear.2025.206435
2025
Prediction of fretting fatigue damage under variable loading blocks: Effect of plasticity DOI : 10.1016/j.ijfatigue.2025.109022
2025
How transfer film formation in bronze/silver-graphite sliding contact drives its electrical performance DOI : 10.1016/j.wear.2025.205976
2025
An elastoplastic analysis of fretting crack nucleation: Correlation between critical distance and grain size DOI : 10.1016/j.ijfatigue.2025.108854
2025
Flow-induced fretting in DEMO divertor targets equipped with swirl tapes: Numerical investigation through one-way fluid-structure interaction simulations DOI : 10.1016/j.fusengdes.2025.115307
2025
Influence of a copper interlayer on the electrical contact resistance of a nickel-silver-plated interface subjected to fretting wear DOI : 10.1016/j.wear.2025.205886
2025
Closed-form solutions for simplified fretting wear profiles prediction incorporating an inverse identification of local wear rates DOI : 10.1016/j.wear.2025.205979
2025
Scenario for the formation of fretting obtained TTS in TA6V from detailed microstructural analysis DOI : 10.1016/j.wear.2025.205834
2025
Tribological investigation of new self-fluxing nickel alloys for high temperature application: The effect of silicon distribution on glaze layer formation DOI : 10.1016/j.wear.2024.205631
2025
Synergic effect of grease and zinc coating against fretting fatigue damages in a crossed steel wire contact: application to offshore wind mooring ropes DOI : 10.1016/j.engfailanal.2025.109776
2024
Effect of zinc coating on the fretting fatigue endurance of crossed steel wires DOI : 10.1016/j.wear.2024.205383
2024
A reverse identification of the friction coefficient operating within crack lips through a complete elastoplastic simulation of 3D fretting fatigue cracks DOI : 10.1016/j.engfracmech.2024.110157
2024
Influence of post-processing treatments on fatigue limit of notched additive manufactured Ti-6AL-4V determined by rapid thermographic methodology DOI : 10.1016/j.ijfatigue.2023.108034
2023
Heterogeneity in tribologically transformed structure (TTS) of Ti–6Al–4V under fretting DOI : 10.1016/j.wear.2023.204680
2023
Fretting-fatigue of shrink fit lug-bush assemblies: Interference-fit effect DOI : 10.1016/j.triboint.2023.108581
2023
Influence of SiC particles orientation on fretting crack extension in an Al-SiC metal matrix composite DOI : 10.1016/j.engfracmech.2023.109091
2023
Fretting tests for cyclic plastic law identification: Application to a 1XXX aluminium crossed wire contact DOI : 10.1016/j.triboint.2022.107958
2023
Comparison between physical and machine learning modeling to predict fretting wear volume DOI : 10.1016/j.triboint.2022.107936
2023
Experimental investigation of galling occurrence in sliding contact under high pressure of a manganese phosphate versus steel interface: Comparison of two greases DOI : 10.1016/j.wear.2023.204820
2023
Surface morphology, contact size and contact geometry effects on grease-lubricated fretting contacts DOI : 10.1016/j.wear.2023.204687
2023
Stability of the critical distance method for fretting cracking prediction: influence of microstructure and crack nucleation size DOI : 10.1016/j.triboint.2023.108570
2023
A hybrid analytical-FEM 3D approach including wear effects to simulate fretting fatigue endurance: Application to steel wires in crossed contact DOI : 10.1016/j.triboint.2023.108713
2023
Predicting fretting-fatigue endurance of rotating bending shrink-fitted assemblies using a sequential RUIZ-SWT approach: The effect of entrapped debris layer DOI : 10.1016/j.triboint.2023.108593
2023
A global–local approach to predict the fretting-fatigue failure of clamped aluminum powerline conductors: From mono-contact crossed wires to full conductor vibrational tests DOI : 10.1016/j.engfailanal.2023.107073
2022
An experimental investigation of galling phenomenon generated in an alternated sliding ring-on-ring interface: Application to a full-scale solid lubricant interface DOI : 10.1016/j.wear.2022.204457
2022
Explicit formulations of adhesive wear extension in fretting interfaces applying the contact oxygenation concept DOI : 10.1016/j.wear.2021.204147
2022
Friction energy wear approach DOI : 10.1016/B978-0-12-824096-0.00006-8
2022
Modeling contact size effect on fretting wear: a combined contact oxygenation - third body approach DOI : 10.1016/j.wear.2021.204168
2022
Influence of the relative humidity and H2S - SO2 polluted air on the fretting wear behavior of silver-plated electrical contacts DOI : 10.1016/j.wear.2022.204455
2022
Fretting wear modeling of 3D and 2D Hertzian contacts with a third-body layer using a Winkler elastic foundation model DOI : 10.1016/j.triboint.2022.107493
2022
INFLUENCE OF GREASE LUBRICATION ON FRETTING-FATIGUE DAMAGES OF STEEL WIRE ROPES DOI : 10.1115/OMAE2022-79102
2022
Influence of a pre-existing glaze layer on the fretting-wear response of HS25 cobalt-based alloy subjected to various temperature conditions DOI : 10.1016/j.wear.2021.204144
2021
Fretting wear analysis through a mechanical friction energy approach: Impact of contact loadings and ambient conditions DOI : 10.1016/B978-0-12-823765-6.00007-9
2021
Micromechanical tensile test investigation to identify elastic and toughness properties of thin nitride compound layers DOI : 10.1016/j.surfcoat.2021.127303
2021
Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts DOI : 10.1016/j.triboint.2021.107077
2021
Modeling contact oxygenation and adhesive wear extension in axisymmetric flat circular fretting interfaces DOI : 10.1016/j.wear.2021.203822
2020
Modeling the fretting fatigue endurance from partial to gross slip: The effect of debris layer DOI : 10.1016/j.triboint.2019.106069
2020
Shear driven crack arrest investigation under compressive state: Prediction of fretting fatigue failure of aluminium strands DOI : 10.1016/j.ijfatigue.2020.105589
2020
An experimental investigation of adhesive wear extension in fretting interface: Application of the contact oxygenation concept DOI : 10.1016/j.triboint.2020.106266
2020
Understanding and formalization of the fretting-wear behavior of a cobalt-based alloy at high temperature DOI : 10.1016/j.wear.2020.203297
2020
Modelling adhesive wear extension in fretting interfaces: An advection-dispersion-reaction contact oxygenation approach DOI : 10.1016/j.triboint.2020.106490
2020
A multi-scale strategy to predict fretting-fatigue endurance of overhead conductors DOI : 10.1016/j.triboint.2019.106053
2019
Fretting wear rate evolution of a flat-on-flat low alloyed steel contact: A weighted friction energy formulation DOI : 10.1016/j.wear.2018.12.022
2019
Normal force and displacement amplitude influences on silver-plated electrical contacts subjected to fretting wear: A basic friction energy – contact compliance formulation DOI : 10.1016/j.wear.2018.12.010
2019
The formation of a cobalt-based glaze layer at high temperature: A layered structure DOI : 10.1016/j.wear.2019.203101
2019
A combined friction energy and tribo-oxidation formulation to describe the high temperature fretting wear response of a cobalt-based alloy DOI : 10.1016/j.wear.2019.01.023
2018
Numerical methods for stress intensity factor ΔK calculations of fretting cracked interface DOI : 10.1016/j.triboint.2017.10.029
2018
Effect of Lubrication on DC and RF Electrical Endurance of Gold Plated Contacts Subjected to Fretting Wear DOI : 10.1109/HOLM.2018.8611662
2018
A tribo-oxidation abrasive wear model to quantify the wear rate of a cobalt-based alloy subjected to fretting in low-to-medium temperature conditions DOI : 10.1016/j.triboint.2018.04.032
2018
Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches DOI : 10.1016/j.ijfatigue.2018.07.034
2018
A new criterion to quantify the DC and RF electrical response of an electrical contact subject to fretting wear DOI : 10.1016/j.wear.2018.07.017
2018
The Effects of Relative Humidity on the Fretting Wear Behavior of Silver-plated Electrical Contacts DOI : 10.1109/HOLM.2018.8611782
2018
Influence of humidity on the endurance of silver-plated electrical contacts subjected to fretting wear DOI : 10.1016/j.surfcoat.2018.07.109
2018
A dynamical FEA fretting wear modeling taking into account the evolution of debris layer DOI : 10.1016/j.wear.2018.07.018
2017
Fretting wear of pure cobalt chromium and nickel to identify the distinct roles of HS25 alloying elements in high temperature glaze layer formation DOI : 10.1016/j.wear.2017.01.049
2017
In situ fretting fatigue crack propagation analysis using synchrotron X-ray radiography DOI : 10.1016/j.ijfatigue.2016.12.024
2017
Effect of fretting wear of connectors regarding phase noise of RF signal: Influence of sliding amplitude and gold coating thickness DOI : 10.1109/HOLM.2017.8088058
2017
A non-collinear fretting-fatigue experiment to compare multiaxial fatigue criteria: critical shear plane strategy is better than invariant formulations DOI : 10.1016/j.triboint.2016.09.011
2017
Identification of parameters influencing the glaze layer formation and stability at high temperature for a Waspaloy/René125 contact under fretting wear conditions DOI : 10.1016/j.wear.2017.07.008
2017
Wear rate impact on Ti-6Al-4V fretting crack risk: Experimental and numerical comparison between cylinder/plane and punch/plane contact geometries DOI : 10.1016/j.triboint.2016.11.023
2017
Contact size, frequency and cyclic normal force effects on Ti–6Al–4V fretting wear processes: An approach combining friction power and contact oxygenation DOI : 10.1016/j.triboint.2016.12.049
2017
Fretting wear of low current electrical contacts: Quantification of electrical endurance DOI : 10.1109/HOLM.2017.8088056
2017
Prediction of electrical contact resistance failure of Ag/Ag plated contact subjected to complex fretting-reciprocating sliding DOI : 10.1016/j.wear.2016.12.033
2017
Prediction of sliding speed and normal force effects on friction and wear rate evolution in a dry oscillating-fretting PTFE/Ti-6Al-4V contact DOI : 10.1016/j.wear.2017.02.021
2017
Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures DOI : 10.1016/j.wear.2017.09.015
2017
Quantitative calorimetric analysis of the fretting damage: Construction of the elastic shakedown boundary DOI : 10.1016/j.ijfatigue.2016.10.018
2017
A numerical simulation of fretting wear profile taking account of the evolution of third body layer DOI : 10.1016/j.wear.2017.01.063
2017
Fretting wear of a nitrided 316L/304L contact subject to in-phase normal force fluctuation in dry and lithium-boron solution: An RP-friction energy wear approach DOI : 10.1016/j.wear.2017.01.075
2016
Plasma-sprayed coatings: Identification of plastic properties using macro-indentation and an inverse Levenberg-Marquardt method DOI : 10.1016/j.mechmat.2016.03.003
2016
Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments DOI : 10.1016/j.ijfatigue.2015.07.015
2016
Nanocrystalline glaze layer in ceramic-metallic interface under fretting wear DOI : 10.1016/j.surfcoat.2016.07.100
2016
Fretting fatigue crack propagation rate under variable loading conditions DOI : 10.3221/IGF-ESIS.35.27
2016
Lifetime prediction methodology for variable fretting fatigue loading: Plasticity effect DOI : 10.1016/j.ijfatigue.2016.05.025
2016
Fretting wear response of a nitrided 316L SS/304L SS interface: Effect of lithium/bore liquid environment DOI : 10.1016/j.surfcoat.2016.06.091
2016
Stability of critical distance approach to predict fretting fatigue cracking: A "ℓopt-bopt" concept DOI : 10.1016/j.ijfatigue.2015.07.016
2016
Investigation of grease behavior under simple and complex displacement amplitudes conditions DOI : 10.1016/j.triboint.2016.01.017
2016
An experimental study of cracking processes generated in a contact subjected to fretting-fatigue loading under CO2 corrosive seawater environment
2015
Reverse identification of short-long crack threshold fatigue stress intensity factors from plain fretting crack arrest analysis DOI : 10.1016/j.engfracmech.2014.11.001
2015
A FEM fretting map modeling: Effect of surface wear on crack nucleation DOI : 10.1016/j.wear.2015.01.013
2015
An energy-based approach to understand the effect of fretting displacement amplitude on grease-lubricated interface DOI : 10.1016/j.wear.2015.07.015
2015
Influence of carbon-based solid lubricant on fretting wear response for alumina-based ceramics versus cobalt superalloy contact DOI : 10.1016/j.surfcoat.2015.07.043
2015
A model for single asperity perturbation on lubricated sliding contact with DLC-coated solids DOI : 10.1016/j.triboint.2014.05.009
2015
Semi-physical neural network model for fretting wear estimation DOI : 10.3233/IFS-141461
2015
Experimental study of the stress gradient effect under fretting loading by full field measurement techniques DOI : 10.1016/j.wear.2014.12.007
2015
Electrical fretting wear performance of new silver composite coatings DOI : 10.1109/HOLM.2015.7355111
2015
Prediction of Fretting-fatigue Crack Nucleation Using a Surface Shear - Sliding Size Crack Analog Parameter DOI : 10.1016/j.proeng.2015.12.649
2015
Prediction of the electrical contact resistance endurance of silver-plated coatings subject to fretting wear, using a friction energy density approach DOI : 10.1016/j.wear.2014.12.006
2015
FEM modeling of crack nucleation and crack propagation fretting fatigue maps: Plasticity effect DOI : 10.1016/j.wear.2015.01.037
2015
Effect of fretting wear damage in RF connectors subjected to vibration: DC contact resistance and phase-noise response DOI : 10.1109/HOLM.2015.7354950
2014
Crack nucleation threshold under fretting loading by a thermal method DOI : 10.1016/j.triboint.2013.10.008
2014
Introduction of a reverse simulation approach to identify the fatigue stress intensity factor crack arrest threshold from fretting cracking experiments DOI : 10.1016/j.triboint.2013.10.016
2014
Fatigue stress ratio effect on fretting-fatigue crack nucleation: Comparison between multi-axial and uni-axial predictions DOI : 10.4028/www.scientific.net/AMR.891-892.903
2014
Basic Principles of Fretting DOI : 10.1002/9780470017029.ch13
2014
From uni- to multi-axial fretting-fatigue crack nucleation: Development of a stress-gradient-dependent critical distance approach DOI : 10.1016/j.ijfatigue.2013.05.016
2014
An effective friction energy density approach to predict solid lubricant friction endurance: Application to fretting wear DOI : 10.1016/j.wear.2014.07.009
2014
The electrical contact resistance endurance of heterogeneous Ag/Sn interfaces subjected to fretting wear
2014
Crack nucleation threshold under fretting loading by a thermal method DOI : 10.1007/978-3-319-00876-9_4
2014
Influence of scratches on the wear behavior of DLC coatings DOI : 10.1016/j.wear.2014.12.010
2014
From fretting to connector vibration tests: A "transfer function" approach to predict electrical contact resistance endurance
2014
Fracture mechanics of impacted laminated glass subjected to various fatigue stressing conditions DOI : 10.1016/j.engfracmech.2014.05.013
2014
Introduction of a "principal stress-weight function" approach to predict the crack nucleation risk under fretting fatigue using FEM modelling DOI : 10.1016/j.ijfatigue.2013.11.009
2013
Influence of large periodic sliding sequences on the electronical endurance of contacts subjected to fretting wear DOI : 10.1109/HOLM.2013.6651417
2013
Introduction of a power law formulation to quantify the contact size effects on friction and wear responses of dry oscillating sliding contacts: Application to a chromium steel interface DOI : 10.1016/j.wear.2013.01.072
2013
Introduction of a reverse simulation approach to identify the fatigue SIF crack arrest threshold from fretting cracking experiments
2013
Stress gradient effect on the crack nucleation process of a Ti-6Al-4V titanium alloy under fretting loading: Comparison between non-local fatigue approaches DOI : 10.1016/j.ijfatigue.2013.03.005
2013
Prediction of the fretting fatigue crack nucleation endurance of a Ti-6V-4Al/ Ti-6V-4Al interface: Influence of plasticity and tensile/shear fatigue properties DOI : 10.1016/j.proeng.2013.12.134
2013
Application of plain fretting test to extract fatigue properties of materials DOI : 10.1016/j.wear.2013.01.022
2013
Application of a non local fatigue stress gradient-weigth function approach to predict the crack nucleation risk induced by fretting fatigue
2013
Experimental analysis and modeling of the crack arrest condition under severe plastic fretting fatigue conditions DOI : 10.1016/j.proeng.2013.12.132
2013
Impact of synergic interactions between sliding frequency and a cyclic variation of normal force on Ti-6A1-4Y7 Ti-6A1-4V gross slip fretting wear response
2013
Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy DOI : 10.1016/j.ijfatigue.2012.07.007
2013
Application of the friction energy density approach to predict electrical contact endurance in a silver-plated coating subjected to fretting wear DOI : 10.1109/HOLM.2013.6651399
2012
Stress gradient effect on the cracking process of a Ti-6Al-4V titanium alloy under fretting loading and comparison of non-local predicted nucleation approaches
2012
Introduction of a "modified archard wear law" to predict the electrical contact endurance of thin plated silver coatings subjected to fretting wear DOI : 10.1109/HOLM.2012.6336604
2012
Fretting fatigue cracking process of a Ti-10V-2Fe-3Al titanium alloy
2012
Quantification of the electrical contact endurance of thin platted silver coatings subjected to fretting wear: Influence of coating thickness DOI : 10.1049/cp.2012.0649
2012
Residual stress relaxation effects on the cracking and wear processes of shot peened Ti-6Al-4V titanium alloy under fretting fatigue loading
2011
Effect of sandblasting substrate treatment on single lap shear strength of adhesively bonded PEEK and its composites
2011
Effect of variable normal force and frequency on fretting wear response of Ti-6Al-4V contact DOI : 10.1016/j.wear.2011.01.060
2011
Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables DOI : 10.1016/j.wear.2011.01.095
2011
Pressure and temperature effects on Fretting Wear damage of a Cu-Ni-In plasma coating versus Ti17 titanium alloy contact DOI : 10.1016/j.wear.2011.06.008
2011
Introduction of an exponential formulation to quantify the electrical endurance of micro-contacts enduring fretting wear: Application to Sn, Ag and Au coatings DOI : 10.1016/j.wear.2011.01.058
2011
A non-local fatigue approach to quantify Ti10V2Fe3Al fretting cracking process: Application to grinding and shot peening DOI : 10.1016/j.triboint.2010.10.017
2011
Contact fatigue and wear behaviour of bismaleimide polymer subjected to fretting loading under various temperature conditions DOI : 10.1016/j.triboint.2010.11.014
2010
An indirect method based on fretting tests to characterize the elastic properties of materials: Application to an epoxy resin RTM6 under variable temperature conditions DOI : 10.1016/j.wear.2010.06.008
2010
Effects of microstructure on the incipient fatigue and fretting crack processes in Al-Cu-Li alloys DOI : 10.1520/JAI102530
2010
Effect of grinding and shot peening on the cracking process of a Ti-10V-2Fe-3Al titanium alloy solicited in fretting
2010
Identification of fretting fatigue crack propagation mechanisms using acoustic emission DOI : 10.1016/j.triboint.2010.06.009
2010
Stress gradient effect on crack initiation in fretting using a multiaxial fatigue framework DOI : 10.1016/j.ijfatigue.2010.06.004
2010
A non local multiaxial fatigue approach to account for stress gradient effect applied to crack initiation in fretting DOI : 10.1520/JAI102526
2010
Artificial intelligence as efficient technique for ball bearing fretting wear damage prediction DOI : 10.1016/j.wear.2009.08.016
2010
Fretting wear of stainless steels under variable temperature conditions: Introduction of a 'composite' wear law DOI : 10.1016/j.wear.2009.08.029
2010
Characterization of crack nucleation in TA6V under fretting-fatigue loading using the potential drop technique DOI : 10.1016/j.ijfatigue.2010.03.008
2010
Introduction of a new sliding regime criterion to quantify partial, mixed and gross slip fretting regimes: Correlation with wear and cracking processes DOI : 10.1016/j.wear.2010.05.002
2010
A friction energy approach to quantifying lubrication under fretting sliding DOI : 10.1002/ls.105
2010
Interface roughness effect on friction map under fretting contact conditions DOI : 10.1016/j.triboint.2010.02.010
2009
A fast methodology to quantify electrical-contact behaviour under fretting loading conditions DOI : 10.1016/j.wear.2009.06.031
2009
Impact of the nickel interlayer on the electrical resistance of tin-tin interface submitted to fretting loading DOI : 10.1016/j.surfcoat.2008.12.008
2009
Fretting wear damage of HexTOOL™ composite depending on the different fibre orientations DOI : 10.1088/1757-899X/5/1/012019
2009
Effect of normal force on fretting wear mechanisms of a ti/cuniln contact: A tribochemical approach
2009
Impact of contact size and complex gross-partial slip conditions on Ti-6Al-4V/Ti-6Al-4V fretting wear DOI : 10.1016/j.triboint.2008.08.005
2009
Tribochemistry of a Ti alloy under fretting in air: Evidence of titanium nitride formation DOI : 10.1007/s11249-009-9426-6
2009
Development of a fretting-fatigue mapping concept: The effect of material properties and surface treatments DOI : 10.1016/j.wear.2009.09.012
2009
Contact size effect on fretting wear behaviour: Application to an AISI 52100/AISI 52100 interface DOI : 10.1002/ls.74
2009
Fretting-fatigue behaviour of bridge engineering cables in a solution of sodium chloride DOI : 10.1016/j.wear.2008.12.107
2009
Introduction of a fretting-fatigue mapping concept: Development of a dual crack nucleation - crack propagation approach to formalize fretting-fatigue damage DOI : 10.1016/j.ijfatigue.2008.09.002
2009
A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts DOI : 10.1016/j.wear.2008.12.013
2009
Quantitative and qualitative study on the cracking in Ti-6Al-4V material under fretting-fatigue solicitations
2008
A methodological approach ball bearing damage prediction under fretting wear conditions DOI : 10.1109/IS.2008.4670497
2008
Prediction of fretting crack propagation based on a short crack methodology DOI : 10.1016/j.engfracmech.2007.06.011
2008
High temperature fretting wear of a Ti alloy/CuNiIn contact DOI : 10.1016/j.surfcoat.2008.08.043
2008
Fretting wear of a TiN PVD coating under variable relative humidity conditions-development of a 'composite' wear law DOI : 10.1016/j.surfcoat.2007.07.103
2008
On fretting of XC38 steel: Surface treatments effect DOI : 10.1179/175158308X324940
2008
Finite element modelling of fretting wear surface evolution: Application to a Ti-6A1-4V contact DOI : 10.1016/j.wear.2007.01.037
2007
Numerical prediction of fretting contact durability using energy wear approach: Optimisation of finite-element model DOI : 10.1016/j.wear.2007.01.116
2007
A global-local wear approach to quantify the contact endurance under reciprocating-fretting sliding conditions DOI : 10.1016/j.wear.2007.01.072
2007
Application of an energy wear approach to quantify fretting contact durability: Introduction of a wear energy capacity concept DOI : 10.1016/j.triboint.2007.02.011
2007
Systematic approach for morphological analysis of worn surfaces DOI : 10.1002/tt.40
2007
Three-dimensional study of a fretting crack using synchrotron X-ray micro-tomography DOI : 10.1016/j.engfracmech.2006.06.019
2006
Experimental and numerical analysis of local and global plastic behaviour in fretting wear DOI : 10.1016/j.triboint.2006.02.023
2006
Palliatives in fretting: A dynamical approach DOI : 10.1016/j.triboint.2006.02.038
2006
Development of a contact compliance method to detect the crack propagation under fretting DOI : 10.1016/j.triboint.2006.02.015
2006
Behaviour of shot peening combined with WC-Co HVOF coating under complex fretting wear and fretting fatigue loading conditions DOI : 10.1016/j.surfcoat.2006.08.094
2006
Fretting wear of Ti(CxNy) PVD coatings under variable environmental conditions DOI : 10.1243/13506501JET139
2006
Comparison of shot peening and nitriding surface treatments under complex fretting loadings DOI : 10.4028/0-87849-400-6.105
2006
Determination and prediction of the fretting crack initiation: introduction of the (P, Q, N) representation and definition of a variable process volume DOI : 10.1016/j.ijfatigue.2005.09.005
2006
Prediction of the crack extension under fretting wear loading conditions DOI : 10.1016/j.ijfatigue.2006.01.002
2006
Characterisation of fretting fatigue damage using synchrotron X-ray micro-tomography DOI : 10.1016/j.triboint.2006.02.047
2005
Hard coatings durability under fretting wear DOI : 10.1016/s0167-8922(05)80067-7
2005
Prediction of the coating durability under oscillating sliding contact : INTRODUCTION of a local energy density parameter DOI : 10.1115/wtc2005-64044
2005
A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings DOI : 10.1016/j.wear.2005.01.030
2005
Prediction of cracking in Ti-6Al-4V alloy under fretting-wear: Use of the SWT criterion DOI : 10.1016/j.wear.2004.11.026
2005
Development of a Wöhler-like approach to quantify the Ti(C xNy) coatings durability under oscillating sliding conditions DOI : 10.1016/j.wear.2005.02.071
2005
Wear kinetics of Ti-6Al-4V under constant and variable fretting sliding conditions DOI : 10.1016/j.wear.2005.01.034
2005
A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume DOI : 10.1016/j.ijfatigue.2004.09.001
2005
Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions DOI : 10.1016/j.triboint.2004.06.002
2005
Experimental and modelling aspects of abrasive wear of a A357 aluminium alloy under gross slip fretting conditions DOI : 10.1016/j.wear.2004.04.010
2004
A quantitative approach of Ti-6Al-4V fretting damage: Friction, wear and crack nucleation DOI : 10.1016/j.wear.2004.05.011
2004
Written discussion - Contributions
2004
Fretting wear analysis of TiC/VC multilayered hard coatings: Experiments and modelling approaches DOI : 10.1016/j.wear.2004.02.009
2003
Impact of contact size and geometry on the lifetime of a solid lubricant DOI : 10.1016/S0043-1648(03)00157-1
2003
Friction damage of aluminium alloys DOI : 10.1108/00368790310496428
2003
The effect of diffusion treatments in a glow-discharge plasma in Ar+O2 atmosphere on friction and wear of Ti-6Al-4V alloy DOI : 10.1016/S0042-207X(02)00640-1
2003
Fretting maps for anodised aluminium alloys DOI : 10.1016/S0040-6090(03)00002-6
2003
Fretting wear behavior of a Cu-Ni-In plasma coating DOI : 10.1016/S0257-8972(02)00639-4
2003
Impact of variable loading conditions on fretting wear DOI : 10.1016/S0257-8972(02)00643-6
2003
An energy description of wear mechanisms and its applications to oscillating sliding contacts DOI : 10.1016/S0043-1648(03)00117-0
2003
Correlation between fretting situation and the contact resistivity of electrical connections
2002
Wear analysis of A357 aluminium alloy under fretting DOI : 10.1016/S0043-1648(02)00116-3
2002
A global methodology to quantify fretting damages
2002
Prediction of crack nucleation under partial slip fretting conditions DOI : 10.1243/030932402320950152
2001
An energy description of hard coating wear mechanisms DOI : 10.1016/S0257-8972(00)01161-0
2001
Kinetics of fretting wear of TiC/VC coatings on M2 HSS steel DOI : 10.1106/152451102025828
2001
Elastic-plastic shakedown analysis of fretting wear DOI : 10.1016/S0043-1648(00)00508-1
2001
The fretting sliding transition as a criterion for electrical contact performance DOI : 10.1016/S0043-1648(01)00685-8
2001
Effect of shot peening on the freeting wear of Ti-6Al-4V DOI : 10.1016/S0043-1648(01)00671-8
2001
Shakedown analysis and fretting wear response under gross slip condition DOI : 10.1016/s0043-1648(01)00767-0
2001
Kinetics of fretting wear of TiC/VC coatings on M2 HSS steel DOI : 10.1109/WBL.2001.946578
2000
Tribologically transformed structure in fretting DOI : 10.1016/S0043-1648(00)00464-6
2000
Description of fretting damage by contact mechanics DOI : 10.1002/zamm.20000801311
2000
Multiaxial fatigue analysis of fretting contact taking into account the size effect
2000
Fretting-wear and fretting-fatigue: Relation through a mapping concept DOI : 10.1520/stp14721s
1999
Prédiction de l'amorçage dans on contact soumis à la sollicitation de fretting DOI : 10.1051/metal/199996091131
1998
Developments of fretting sliding criteria to quantify the local friction coefficient evolution under partial slip condition DOI : 10.1016/s0167-8922(98)80071-0
1998
Identification of the characteristic length scale for fatigue cracking in fretting contacts DOI : 10.1051/jp4:1998820
1997
Fretting behaviour of TiN coatings DOI : 10.1179/sur.1997.13.3.227
1997
Wear analysis in fretting of hard coatings through a dissipated energy concept DOI : 10.1016/S0043-1648(96)07436-4
1996
Fretting behaviour of TiN and Me:CH coatings in dry air and argon
1996
Third body effects in fretting DOI : 10.1016/s0167-8922(08)70769-7
1996
Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions DOI : 10.1016/0043-1648(95)06741-8
1996
Stress and fatigue analysis of fretting on a stressed specimen under partial slip conditions DOI : 10.1002/tt.3020030103
1996
Quantification of fretting damage DOI : 10.1016/S0043-1648(96)07306-1
1995
Analysis of sliding behaviour for fretting loadings: determination of transition criteria DOI : 10.1016/0043-1648(94)06582-9
1994
Fretting behaviour of hard coatings under high normal load DOI : 10.1016/0257-8972(94)90207-0

PhD supervision

2025 Characterization and modeling of the damage to wound rotors under thermomechanical stress: wear and damage to insulators ROSSI Maminirina Alyssa Cynthia
2025 Development of a predictive wear model for fretting issues in nuclear fuel assemblies MOREIRA LEVY Marjory
2025 Experimental study and modeling of wear and friction of metallic alloys (TA6V, 316L) under hydrogen RENOU Hana
2024 Modeling of crack initiation and propagation induced by fretting fatigue loading FOURCIN Morgan
2023 Experimental study and modeling of tribological phenomena (wear and friction) under H2 gas FARTAS Mohammed
2022 Study of the fretting fatigue corrosion behavior of steel and aluminum strands in overhead power transmission conductors MEDRALA Clément

Team

Publication(s)

PhD supervision