Keywords
Team
SIMS - Simulation des Matériaux et des Structures
Biography
Matthieu Mazière is a researcher specializing in materials mechanics and the modeling of complex mechanical behaviors. His work focuses primarily on the study of dynamic and static aging phenomena, such as the Portevin-Le Chatelier (PLC) effect and Lüders bands, in various metal alloys, including steels, nickel-based superalloys, and aluminum alloys. His expertise includes the development of advanced constitutive models, such as the Kubin-Estrin-McCormick model, incorporating multiscale approaches to capture the interactions between microstructure and macroscopic behavior. Mazière also explores the mechanisms of brittle and ductile fracture, in relation to carbide distributions, phase transformations, and thermomechanical loading conditions. His research combines experimental methods, such as digital image correlation (DIC) and laminography, with finite element simulations to validate and refine the proposed models. His approach aims to improve the prediction of material durability and strength under extreme stresses, particularly in the aerospace and energy sectors.
Publication(s)
-
2026
Experimental and numerical spatio-temporal analysis of the Portevin–Le Chatelier dynamics in a Nickel based superalloy DOI : 10.1016/j.euromechsol.2026.106068
-
2026
Cleavage fracture of high strength tempered martensite and mixed tempered martensite + upper bainite medium carbon steel DOI : 10.1007/s10704-025-00898-4
-
2025
Re-straining induced triggering of the Portevin-Le Chatelier effect in recrystallised 2198 T3 and T8 aluminium alloy: Experimental observations and FE simulations for smooth and notched samples DOI : 10.1016/j.ijsolstr.2025.113636
-
2023
Experimental and numerical analysis of the Portevin–Le Chatelier effect in a nickel-base superalloy for turbine disks application DOI : 10.1016/j.ijsolstr.2022.112076
-
2021
Loss of ellipticity analysis in non-smooth plasticity DOI : 10.1016/j.ijsolstr.2021.02.021
-
2021
Experimental and computational approach to fatigue behavior of polycrystalline tantalum DOI : 10.3390/met11030416
-
2021
Finite element simulation of the Portevin–Le Chatelier effect in highly reinforced metal matrix composites DOI : 10.1080/14786435.2021.1919331
-
2021
Effect of Lüders and Portevin-Le Chatelier localization bands on plasticity and fracture of notched steel specimens studied by DIC and FE simulations DOI : 10.1016/j.ijplas.2020.102880
-
2020
Advanced quantification of the carbide spacing and correlation with dimple size in a high-strength medium carbon martensitic steel DOI : 10.1016/j.matchar.2020.110531
-
2020
Effect of austenite stability on the fracture micromechanisms and ductile-to-brittle transition in a medium-Mn, ultra-fine-grained steel for automotive applications DOI : 10.1007/s10853-020-04470-4
-
2020
A general and efficient multistart algorithm for the detection of loss of ellipticity in elastoplastic structures DOI : 10.1002/nme.6247
-
2019
Local Ratcheting Phenomena in the Cyclic Behavior of Polycrystalline Tantalum DOI : 10.1007/s11837-019-03539-z
-
2019
Multiscale examination of deformation and fracture mechanisms of a duplex advanced high strength steel: Effect of testing temperature and of micromechanical interactions between microstructural constituents DOI : 10.1016/j.msea.2019.138196
-
2019
Portevin-Le Chatelier effect triggered by complex loading paths in an Al–Cu aluminium alloy DOI : 10.1080/14786435.2018.1550296
-
2018
Identification of ductile to brittle transition temperature by using plane strain specimen in tensile test and correlation with instrumented Charpy impact test: Experimental and numerical study DOI : 10.1051/meca/2017034
-
2018
The Effect of Microstructure Constituents on the Static and Dynamic Fracture Behavior of High Strength Quenched and Tempered Martensitic Steels DOI : 10.1016/j.prostr.2018.12.126
-
2018
Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality DOI : 10.1016/j.engfracmech.2017.12.035
-
2017
Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel DOI : 10.1016/j.msea.2017.09.002
-
2017
A constitutive model accounting for strain ageing effects on work-hardening. Application to a C–Mn steel DOI : 10.1016/j.crme.2017.09.005
-
2017
Microstructure, plastic flow and ductile-to-brittle transition of ferrite-austenite duplex low density medium Mn steel
-
2017
Thermo-mechanical simulation of selective laser melting at layer scale
-
2017
Ductile fracture of an aeronautical ultra high strength steel
-
2017
Interaction of the Portevin–Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations DOI : 10.1007/s10704-017-0203-5
-
2017
Experimental and numerical analysis of the Lüders phenomenon in simple shear DOI : 10.1016/j.ijsolstr.2016.07.026
-
2017
Finite element simulation of Ti-6Al-4V direct metal deposition
-
2016
The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading DOI : 10.1007/s10704-016-0089-7
-
2016
In situ 3D Synchrotron Laminography Assessment of Edge Fracture in Dual-Phase Steels: Quantitative and Numerical Analysis DOI : 10.1007/s11340-015-0076-3
-
2016
Crystal plasticity simulation of strain aging phenomena in α-titanium at room temperature DOI : 10.1016/j.ijplas.2016.05.007
-
2016
Numerical investigation of dynamic strain ageing and slant ductile fracture in a notched specimen and comparison with synchrotron tomography 3D-DVC DOI : 10.1016/j.prostr.2016.06.422
-
2015
Portevin-Le Chatelier effect under cyclic loading: Experimental and numerical investigations DOI : 10.1080/14786435.2015.1049236
-
2015
Influence of static strain aging on the cleavage fracture of a C-Mn steel DOI : 10.1016/j.engfracmech.2015.04.035
-
2015
A model for ductile damage prediction at low stress triaxialities incorporating void shape change and void rotation DOI : 10.1016/j.ijsolstr.2015.03.003
-
2015
Strain gradient plasticity modeling and finite element simulation of Lüders band formation and propagation DOI : 10.1007/s00161-013-0331-8
-
2015
Fracture behaviour of a Fe-22Mn-0.6C-0.2V austenitic TWIP steel DOI : 10.1016/j.ijmecsci.2015.07.029
-
2014
Investigation and modeling of the anomalous yield point phenomenon in pure tantalum DOI : 10.1016/j.msea.2014.07.028
-
2013
Local approach applied to the fracture toughness of resistance spot welds
-
2013
3D synchrotron laminography assessment of damage evolution in blanked dual phase steels
-
2013
Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging DOI : 10.1016/j.ijplas.2012.09.011
-
2012
Multi-scale approach of strain ageing in polycrystalline tantalum
-
2012
Investigations on the Portevin-Le Chatelier critical strain in an aluminum alloy DOI : 10.1016/j.commatsci.2011.05.039
-
2012
Experimental and numerical study of dynamic strain ageing and its relation to ductile fracture of a C-Mn steel DOI : 10.1016/j.msea.2012.03.069
-
2012
Identification of a strain-aging model accounting for Lüders behavior in a C-Mn steel DOI : 10.1080/14786435.2012.699687
-
2012
Effect of secondary orientation on notch-tip plasticity in superalloy single crystals DOI : 10.1016/j.ijplas.2011.06.003
-
2011
Portevin-Le Chatelier (PLC) instabilities and slant fracture in C-Mn steel round tensile specimens DOI : 10.1016/j.scriptamat.2010.11.005
-
2010
Influence of dynamic strain ageing on ductile fracture of a C-MN steel
-
2010
Numerical aspects in the finite element simulation of the Portevin-Le Chatelier effect DOI : 10.1016/j.cma.2009.11.004
-
2010
Numerical simulation of the portevin - le chatelier effect in various material and at different scales DOI : 10.4028/www.scientific.net/MSF.638-642.2670
-
2010
Simulation of fatigue crack growth by crack tip plastic blunting using cohesive zone elements DOI : 10.1016/j.proeng.2010.03.221
-
2009
Overspeed burst of elastoviscoplastic rotating disks - Part I: Analytical and numerical stability analyses DOI : 10.1016/j.euromechsol.2008.07.008
-
2009
Overspeed burst of elastoviscoplastic rotating disks: Part II - Burst of a superalloy turbine disk DOI : 10.1016/j.euromechsol.2008.10.002
-
2008
Numerical modelling of the Portevin-Le Chatelier effect DOI : 10.3166/REMN.17.761-772
Teaching
FOR 1A - S1
FOR 1A - S2
FOR 2A - S3
FOR 2A - S4
FOR 3A - S5
FOR 3A - S6
Mechanics of Continuous Media
In-person instruction is structured around plenary sessions in the lecture hall and tutorial sessions in smaller classes (PC) with fewer students. Independent work consists (in addition to the engine disassembly/reassembly activity mentioned above) of studies conducted individually or in small groups: work based on course materials (handouts, textbook), and solving two problems selected from an extensive list of highly varied problems (as mentioned above; see details below).
Artistic Expression
Fluid Mechanics (PI MECAERO)
Mechanics of Materials and Structures (PI MECAERO)
Engineers and Transitions" SeminarThe Major Challenges of TomorrowStudent Engagement in 2AATHENS - MP06 - Nonlinear Computational MechanicsPersonal Open-Source ProjectCourse I - Automation (PI MECATRO)Course II - Mechanics (PI MECATRO)Project (PI MECATRO)RegulationControl and AutomationGeoscience and the Anthropocene (GA)VS Geology InternshipGeology Internship or Practical Geology Course (for AST 2A only)Fluid Mechanics (PI MECAERO)Fluids (Research Quarter)ATHENS - MP06 - Nonlinear Computational MechanicsDigital Engineering of Complex Systems (IDSC) trackData, Optimization & Generative AI (Research Quarter)ControversiesElectric GridIntroduction to power system analysisMaterials Science and Engineering (MSE) trackApplied Mathematics: Robotics, Computer Vision, and Control Systems (MAREVA) trackPhysical MetallurgyMaterials Design for New Challenges (Course)Materials for New Challenges (Research Quarter)Artificial IntelligenceLarge-Scale Machine Learning and Data MiningPolitics, Capitalism, UncertaintyFluid Mechanics (PI MECAERO)Mechanics of Materials and Structures (PI MECAERO)Project (PI MECAERO)Entrepreneurship WeekBusiness and Industrial ManagementElective Course Period (October and January)Innovation and Entrepreneurship (INNOV) trackOperations ResearchDesign Engineering (DE) OptionDigital Engineering of Complex Systems (IDSC) trackSubsurface Geophysics (Internship)General Engineering Professions (MIG)Energy Systems Engineering (ISE) trackElective Course Period (October and January)Applied Mathematics: Robotics, Computer Vision, and Control Systems (MAREVA) trackCombinatorial and Stochastic OptimizationData, Optimization & Generative AI (Research Quarter)Materials for EngineersFluid Mechanics (PI MECAERO)Mechanics of Materials and Structures (PI MECAERO)Project (PI MECAERO)Experimental MechanicsOptimizationProject (PI MOVIE)Course II - Feedback (PI MOVIE)Course I - Theory (PI MOVIE)Color, Arts, IndustryElective Course Period (October and January)Production and Logistics SystemsSustainable LogisticsProduction and Logistics Systems (PLS) trackGeneral Engineering Professions (MIG)Fluid Mechanics (PI MECAERO)Project (PI MECAERO)Fluids (Research Quarter)Differential, Integral, and Stochastic Calculus II (Math2)GeostatisticsControl Theory (Course)Control Theory (Research Quarter)Differential, Integral, and Stochastic Calculus I (Math1)Differential, Integral, and Stochastic Calculus II (Math2)OptimizationProject (PI MECATRO)General Engineering Professions (MIG)Materials for EngineersGlass and CeramicsIndustrial EconomicsSocial, Political, and Environmental Issues (SPE)ControversiesATHENS - MP05 - Health and Medicine in Europe - Social, Political, and Ethical Issues at the National and European LevelsIndustrial EconomicsIntroduction to NanomaterialsWater and Energy Flows (PI MOLONARI)Geosciences (GEOSCIENCES) trackDifferential, Integral, and Stochastic Calculus I (Math1)Differential, Integral, and Stochastic Calculus II (Math2)OptimizationCourse I - Automation (PI MECATRO)Differential, Integral, and Stochastic Calculus I (Math1)Differential, Integral, and Stochastic Calculus II (Math2)Water and Energy Flows (PI MOLONARI)Elective Course Period (October and January)GeostatisticsGeostatistics and Applied Probability (GEOSTAT) trackATHENS - MP11 - Structural AnalysisUnderground Resources and the Energy Transition (Research Quarter)Elective Course Period (October and January)Finite ElementsDigital Engineering of Complex Systems (IDSC) trackData, Images, Physical Models, and Machine Learning (Research Quarter)ATHENS - MP30 - Life Cycle of Energy SystemsEnergy Efficiency of Systems (Research Quarter)Mechanics of Continuous MediaCorporate GovernanceCorporate FinanceNew Businesses and Responsible GovernanceDesign Engineering (DE) OptionGeoscience and the Anthropocene (GA)General Engineering Professions (MIG)VS Geology InternshipGeosciences (GEOSCIENCES) trackNatural Environments (Research Quarter)Materials for EngineersMetal 3D PrintingMathematical Optimization for the TransitionNatural Language ProcessingInformation Systems Management (ISM) trackGeology Internship or Practical Geology Course (for AST 2A only)Project (PI MOVIE)Course II - Feedback (PI MOVIE)Course I - Theory (PI MOVIE)ATHENS - MP11 - Structural AnalysisEnergy EngineeringEnergy SystemsIntegration ProjectHeat TransferHeat and Mass TransferEnergy Efficiency of Systems (Research Quarter)Course 1, 2, or 3 - (PI IDS)Touchdown/Touchdown (Pass Interference IDS)Project (PI IDS)Applied Mathematics: Robotics, Computer Vision, and Control Systems (MAREVA) trackElective Course Period (October and January)Synthetic Biology: An IntroductionBiotechnology (BIOTECH) trackEngineering and Health Research (Research Quarter)Computer Hardware and Software ArchitectureGeoscience and the Anthropocene (GA)General Engineering Professions (MIG)VS Geology InternshipNatural HazardsGeology Internship or Practical Geology Course (for AST 2A only)POC and Industry of the Future (Entrepreneurship Quarter)Fluid Mechanics (PI MECAERO)Mechanics of Materials and Structures (PI MECAERO)Project (PI MECAERO)Implantable Devices and Materials for Medical UseExperimental MechanicsMaterials Science and Engineering (MSE) trackEngineering and Health Research (Research Quarter)Quantum Physics (Phys1)Statistical Physics (Phys2)OptimizationGeneral Engineering Professions (MIG)Introduction to Imaging (PI UNDERWATER)Introduction to Underwater Robotics (PI UNDERWATER)In-Depth Look (PI UNDERWATER)Project (PI UNDERWATER)Mechanics of Continuous MediaFluid Mechanics (PI MECAERO)Mechanics of Materials and Structures (PI MECAERO)Project (PI MECAERO)Materials Science and Engineering (MSE) trackFluids (Course)Deep Learning for Image AnalysisElective Course Period (October and January)Design Science - Generative Processes (TR SCPG Course)Processes and Energy (P&E) trackDesign Engineering (DE) OptionPOC and Industry of the Future (Entrepreneurship Quarter)Image Analysis: From Theory to PracticeIntroduction to NanomaterialsATHENS - MP08 - Physics and Mechanics of Random MediaGeosciences (GEOSCIENCES) trackUnderground Resources and the Energy Transition (Research Quarter)Mechanics of Continuous MediaATHENS - MP06 - Nonlinear Computational MechanicsHeat and Mass TransferATHENS - MP30 - Life Cycle of Energy SystemsTestimonialsEco-designATHENS - MP20 - Circular Economy and Eco-Design: The Case of the "Urban Mine.
The Major Challenges of Tomorrow
Student Engagement in 2A
ATHENS - MP06 - Nonlinear Computational Mechanics
Basic Material Models: Material modeling, including rheology, plasticity criteria, incremental theory of plasticity, 3D plastic flow, and basic hardening rules. Identification procedures, inverse problems. Advanced constitutive equations: cyclic and complex loading, damage models, models for thermomechanical loading, foams and cellular systems, hyperelasticity, polymeric materials. Finite element formulation: basic introduction to the method for thermal and mechanical applications. Newton’s method, element assembly, tangent matrix. Integration of constitutive equations, implicit algorithms. Nonlinear geometric and contact analysis, stabilization methods. Stability problems. Localization processes. Mesh adaptation. Coupled problems (thermal-metallurgical-mechanical interactions).
Personal Open-Source Project
PhD supervision
- 2023 Physical modeling of a non-monotonic viscoplastic behavior in large deformations: Portevin-Le Chatelier effect in a nickel-based superalloy BILLON Florian
- 2019 Thermo-mechanical simulation of the Wire Arc Additive Manufacturing (WAAM) process HILAL Sami
- 2018 Detection and simulation of viscoplastic instability modes in turbine disks GUILLERMIN Natan
- 2017 Study of the ballooning of Zircaloy-4 fuel cladding under Loss of Coolant Accident conditions MORYOUSEF Julien
- 2016 Link between microstructure and ductile-to-brittle transition in high-strength quenched and tempered steels TIOGUEM TEAGHO Frank
- 2015 Competition between global and local instabilities during the failure of aeronautical structures AL KOTOB Moubine