Charles-André Gandin

Biographie

Publication(s)

• 2026
  Thermo-mechanical simulation of L-PBF process at part-scale by coupling grain structure calculation and crystal viscoplasticity DOI : 10.1016/j.cma.2025.118429
• 2025
  Multiphysics simulation and microstructure prediction of coaxial wire-laser additive manufacturing process DOI : 10.1016/j.mtla.2025.102461
• 2025
  Effect of crystal orientation on recrystallization occurrence in CMSX-4 DOI : 10.1016/j.matdes.2025.114122
• 2025
  Homogenization methods for thermal study of support structure in laser powder bed fusion (L-PBF) – application to process numerical modeling DOI : 10.1108/HFF-09-2024-0683
• 2025
  Metallurgically-driven thermomechanical analysis of multiple side-to-side laser melting on a 316L substrate DOI : 10.1016/j.addma.2025.104991
• 2024
  Structures in grain-refined directionally solidified hypoeutectic Al-Cu alloys: Benchmark experiments under microgravity on-board the International Space Station DOI : 10.1016/j.mtla.2024.102171
• 2024
  Kinetic effects during the plane-front and dendritic solidification of multicomponent alloys DOI : 10.1016/j.actamat.2023.119473
• 2024
  Part-Scale Thermomechanical and Grain Structure Modeling for Additive Manufacturing: Status and Perspectives DOI : 10.3390/met14101173
• 2023
  Simulation of dendritic grain structures with Cellular Automaton–Parabolic Thick Needle model DOI : 10.1016/j.commatsci.2023.112360
• 2023
  Electromagnetic levitation containerless processing of metallic materials in microgravity: rapid solidification DOI : 10.1038/s41526-023-00310-2
• 2023
  Three-dimensional modeling of solidification grain structures generated by laser powder bed fusion DOI : 10.1016/j.mtla.2023.101804
• 2022
  Structure and texture simulations in fusion welding processes – comparison with experimental data DOI : 10.1016/j.mtla.2021.101305
• 2022
  The thermodynamics of non-equilibrium interfaces during phase transformations in concentrated multicomponent alloys DOI : 10.1016/j.actamat.2022.118407
• 2022
  Finite Element Modeling of Powder Bed Fusion at Part Scale by a Super-Layer Deposition Method Based on Level Set and Mesh Adaptation DOI : 10.1115/1.4052386
• 2022
  Growth competition between columnar dendritic grains – The role of microstructural length scales DOI : 10.1016/j.actamat.2021.117395
• 2022
  Thermodynamic coupling in the computation of dendrite growth kinetics for multicomponent alloys DOI : 10.1016/j.calphad.2022.102429
• 2022
  Hybrid Cellular Automaton - Parabolic Thick Needle model for equiaxed dendritic solidification DOI : 10.1016/j.jmst.2022.02.017
• 2021
  A Partitioned Solution Algorithm for Concurrent Computation of Stress–Strain and Fluid Flow in Continuous Casting Process DOI : 10.1007/s11663-021-02070-4
• 2021
  Processing of directionally cast nickel-base superalloys: Solidification and heat treatments DOI : 10.1016/B978-0-12-819357-0.00015-9
• 2021
  A simple and efficient numerical model for thermal contact resistance based on diffuse interface immersed boundary method DOI : 10.1016/j.ijthermalsci.2020.106817
• 2021
  Morphological stability of spherical particles - Extension of the Mullins-Sekerka criteria to multi-component alloys under a non-stationary diffusive regime DOI : 10.1016/j.actamat.2020.116539
• 2020
  Three-dimensional cellular automaton modeling of silicon crystallization with grains in twin relationships DOI : 10.1016/j.actamat.2020.03.051
• 2020
  3D cellular automaton modelling of silicon crystallization including grains in twin relationship DOI : 10.1088/1757-899X/861/1/012052
• 2020
  Concurrent and coupled resolution of fluid flow and solid deformation in solidification processes DOI : 10.1088/1757-899X/861/1/012068
• 2020
  Impact of solute flow during directional solidification of a Ni-based alloy: In-situ and real-time X-radiography DOI : 10.1016/j.actamat.2020.04.003
• 2020
  On the analytical and numerical simulation of an oscillating drop in zero-gravity DOI : 10.1016/j.compfluid.2019.104362
• 2019
  Level-set modelling of Laser Beam Melting process applied onto ceramic materials - Comparison with experimental results DOI : 10.1088/1757-899X/529/1/012002
• 2019
  A partitioned two-step solution algorithm for concurrent fluid flow and stress–strain numerical simulation in solidification processes DOI : 10.1016/j.cma.2019.07.006
• 2019
  Analysis of columnar-to-equiaxed transition experiment in lab scale steel casting by a multiphase model DOI : 10.1088/1757-899X/529/1/012039
• 2019
  Dendrite growth in undercooled Al-rich Al-Ni melts measured on Earth and in Space DOI : 10.1103/PhysRevMaterials.3.073402
• 2019
  Preface DOI : 10.1088/1757-899X/529/1/011001
• 2019
  A partitioned solution algorithm for fluid flow and stress-strain computations applied to continuous casting DOI : 10.1088/1757-899X/529/1/012082
• 2019
  Finite diffusion microsegregation model applied to multicomponent alloys DOI : 10.1088/1757-899X/529/1/012029
• 2019
  Additive manufacturing of an oxide ceramic by laser beam melting—Comparison between finite element simulation and experimental results DOI : 10.1016/j.jmatprotec.2019.02.004
• 2018
  Competitive grain growth during directional solidification of a polycrystalline binary alloy: Three-dimensional large-scale phase-field study DOI : 10.1016/j.mtla.2018.05.002
• 2018
  Modeling of eutectic growth kinetics with thermodynamic couplings DOI : 10.1016/j.actamat.2018.08.056
• 2018
  Growth competition between columnar dendritic grains – Cellular automaton versus phase field modeling DOI : 10.1016/j.actamat.2018.05.032
• 2018
  Numerical modelling of fluid and solid thermomechanics in additive manufacturing by powder-bed fusion: Continuum and level set formulation applied to track- and part-scale simulations DOI : 10.1016/j.crme.2018.08.008
• 2018
  Finite Element Multi-scale Modeling of Chemical Segregation in Steel Solidification Taking into Account the Transport of Equiaxed Grains DOI : 10.1007/s11661-018-4496-4
• 2018
  Numerical modelling of the impact of energy distribution and Marangoni surface tension on track shape in selective laser melting of ceramic material DOI : 10.1016/j.addma.2018.03.003
• 2017
  Three-dimensional finite element thermomechanical modeling of additive manufacturing by selective laser melting for ceramic materials DOI : 10.1016/j.addma.2017.02.005
• 2017
  Experimental study and two-phase numerical modeling of macrosegregation induced by solid deformation during punch pressing of solidifying steel ingots DOI : 10.1016/j.actamat.2016.11.023
• 2017
  An analytical model with interaction between species for growth and dissolution of precipitates DOI : 10.1016/j.actamat.2017.04.035
• 2017
  Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project DOI : 10.1007/s11837-017-2397-4
• 2017
  Solidification of Undercooled Melts of Al-Based Alloys on Earth and in Space DOI : 10.1007/s11837-017-2402-y
• 2017
  Erratum: Corrigendum to “Analytical model for equiaxed globular solidification in multicomponent alloys” (Acta Materialia (2015) 97 (419–434)(S1359645415002724)(10.1016/j.actamat.2015.04.030)) DOI : 10.1016/j.actamat.2016.10.017
• 2016
  Modeling of GP(I) zone formation during quench in an industrial AA7449 75 mm thick plate DOI : 10.1016/j.matdes.2016.09.052
• 2016
  Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes DOI : 10.1016/j.actamat.2016.05.011
• 2016
  Dendrite growth morphologies in rapidly solidified Al-4.5wt.%Cu droplets DOI : 10.1088/1757-899X/117/1/012055
• 2016
  CAFE simulation of columnar-to-equiaxed transition in Al-7wt%Si alloys directionally solidified under microgravity DOI : 10.1088/1757-899X/117/1/012009
• 2016
  Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation DOI : 10.1007/s11661-016-3564-x
• 2016
  Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy DOI : 10.1007/s11661-016-3694-1
• 2016
  Finite element modeling of deposition of ceramic material during SLM additive manufacturing DOI : 10.1051/matecconf/20168008001
• 2016
  Simulation of shrinkage-induced macrosegregation in a multicomponent alloy during reduced-gravity solidification DOI : 10.1002/9781119274896.ch5
• 2016
  Three-dimensional modeling of a thermal dendrite using the phase field method with automatic anisotropic and unstructured adaptive finite element meshing DOI : 10.1088/1757-899X/117/1/012008
• 2016
  Quantification of Primary Dendritic and Secondary Eutectic Nucleation Undercoolings in Rapidly Solidified Hypo-Eutectic Al-Cu Droplets DOI : 10.1007/s11661-016-3594-4
• 2016
  Grain selection in single crystal superalloy castings
• 2016
  Microstructure modeling
• 2015
  Simulation of directional solidification of refined Al-7 wt.%Si alloys - Comparison with benchmark microgravity experiments DOI : 10.1016/j.actamat.2015.03.058
• 2015
  Characterization of dendrite morphologies in rapidly solidified Al-4.5 wt.%Cu droplets DOI : 10.1016/j.actamat.2015.02.007
• 2015
  Study of hot tearing and macrosegregation through ingot bending test and its numerical simulation DOI : 10.1088/1757-899X/84/1/012096
• 2015
  Analytical model for equiaxed globular solidification in multicomponent alloys DOI : 10.1016/j.actamat.2015.04.030
• 2015
  Multi-scale finite element modelling of solidification structures by a splitting method taking into account the transport of equiaxed grains DOI : 10.1088/1757-899X/84/1/012007
• 2015
  Simulation of Channel Segregation During Directional Solidification of In—75 wt pct Ga. Qualitative Comparison with In Situ Observations DOI : 10.1007/s11661-015-2963-8
• 2015
  Evolution of the dendritic morphology with the solidification velocity in rapidly solidified Al-4.5wt.%Cu droplets DOI : 10.1088/1757-899X/84/1/012016
• 2015
  Modelling of columnar-to-equiaxed and equiaxed-to- columnar transitions in ingots using a multiphase model DOI : 10.1088/1757-899X/84/1/012087
• 2015
  Temperature-based energy solver coupled with tabulated thermodynamic properties - Application to the prediction of macrosegregation in multicomponent alloys DOI : 10.1016/j.commatsci.2014.12.009
• 2014
  Columnar-to-equiaxed transition in solidification processing of ALSi7 alloys in microgravity-the CETSOL project DOI : 10.4028/www.scientific.net/MSF.790-791.12
• 2014
  Computation of phase transformation paths in steels by a combination of the partial- and para-equilibrium thermodynamic approximations DOI : 10.2355/isijinternational.54.1274
• 2014
  Numerical simulation of AM1 microstructure DOI : 10.1051/matecconf/20141411003
• 2014
  Atom probe tomography of secondary γ′ precipitation in a single crystal Ni-based superalloy after isothermal aging at 1100 °c DOI : 10.1016/j.jallcom.2014.05.132
• 2014
  Structures in directionally solidified Al-7 wt.% Si alloys: Benchmark experiments under microgravity DOI : 10.1016/j.actamat.2013.10.038
• 2014
  Spinodal decomposition mechanism of γ′ precipitation in a single crystal Ni-based superalloy DOI : 10.1007/s11661-014-2506-8
• 2014
  Coupled Cellular Automaton (CA) - Finite Element (FE) Modeling of Directional Solidification of Al-3.5 wt% Ni Alloy: A Comparison with X-ray Synchrotron Observations DOI : 10.2355/isijinternational.54.392
• 2014
  Optimized parallel computing for cellular automaton-finite element modeling of solidification grain structures DOI : 10.1088/0965-0393/22/1/015012
• 2014
  3D coupled cellular automaton (CA)-FINITE ELEment (FE) modeling for solidification grain structures in gas tungsten arc welding (GTAW) DOI : 10.2355/isijinternational.54.401
• 2014
  CRISTAPRESS: An optical cell for structure development in high-pressure crystallization DOI : 10.1063/1.4862473
• 2014
  Erratum: CRISTAPRESS: An optical cell for structure development in high-pressure crystallization (Review of Scientific Instruments (2014) 85 (0013906)) DOI : 10.1063/1.4866646
• 2013
  Phase selection and microstructure formation in undercooled Co-61.8 at.% Si melts under various containerless processing conditions DOI : 10.1016/j.actamat.2013.04.061
• 2013
  A coupled Cellular Automaton - Finite Element approach for the modelling of grain structure development in TIG welding; [Développement d'une approche couplée Automates Cellulaires - Eléments Finis pour la modélisation du développement des structures de grains en soudage TIG] DOI : 10.1051/matecconf/20130702002
• 2013
  Direct modeling of structures and segregations up to industrial casting scales DOI : 10.1007/s11837-013-0679-z
• 2013
  A newly designed experiment for high-pressure solidification of transparent materials
• 2013
  Influence of natural convection during upward directional solidification: A comparison between in situ X-ray radiography and direct simulation of the grain structure DOI : 10.1016/j.actamat.2013.04.067
• 2013
  Direct simulation of a solidification benchmark experiment DOI : 10.1007/s11661-012-1465-1
• 2013
  Prediction of carbide precipitation using partial equilibrium approximation in Fe-C-V-W-Cr-Mo high speed steels DOI : 10.2355/isijinternational.53.493
• 2013
  Numerical simulation of precipitation in multicomponent Ni-base alloys DOI : 10.1016/j.actamat.2013.07.018
• 2013
  A newly designed experiment for high-pressure solidification of transparent materials DOI : 10.1002/9781118663547.ch55
• 2013
  Quantification of primary dendritic and secondary eutectic undercoolings of rapidly solidified Al-Cu droplets
• 2012
  Numerical tensile test on a mushy zone sample DOI : 10.1088/1757-899X/33/1/012054
• 2012
  Quantitative Analysis of Alloy Structures Solidified Under Limited Diffusion Conditions DOI : 10.1002/9783527647903.ch21
• 2012
  A multiphase segregation model for multicomponent alloys with a peritectic transformation DOI : 10.1088/1757-899X/33/1/012063
• 2012
  Numerical simulation of microstructure formation during solidification and heat treatments of Ni-base superalloys
• 2012
  Direct simulation of a directional solidification experiment observed in situ and real-time using X-ray imaging DOI : 10.1088/1757-899X/33/1/012077
• 2012
  Prediction of solidification path and carbide precipitation in Fe-C-V-Cr-Mo-W high speed steels DOI : 10.1088/1757-899X/33/1/012061
• 2012
  Analysis of a numerical benchmark for columnar solidification of binary alloys DOI : 10.1088/1757-899X/33/1/012086
• 2012
  3D CAFE simulation of a macrosegregation benchmark experiment DOI : 10.1088/1757-899X/33/1/012087
• 2012
  Numerical Simulation of Microstructure Formation during Solidification and Heat Treatments of Ni-Base Superalloys DOI : 10.1002/9781118516430.ch67
• 2012
  Solidification Modeling: From Electromagnetic Levitation to Atomization Processing DOI : 10.1002/9783527647903.ch19
• 2012
  Quatification of primary phase undercooling of rapidly solidified droplets with 3D microtomography DOI : 10.1007/978-3-319-48762-5_10
• 2012
  Neutron diffraction analysis and solidification modeling of Impulse-Atomized Al-36 wt%Ni DOI : 10.1088/1757-899X/33/1/012060
• 2012
  3D CAFE modeling of grain structures: Application to primary dendritic and secondary eutectic solidification DOI : 10.1088/0965-0393/20/1/015010
• 2011
  Multiple non-equilibrium phase transformations: Modeling versus electro-magnetic levitation experiment DOI : 10.1016/j.actamat.2011.04.013
• 2011
  Gas atomization of Al-Ni powders: Solidification modeling and neutron diffraction analysis DOI : 10.1016/j.actamat.2011.07.023
• 2011
  Distributions of structures and solute in directionally solidified Al - 7 wt % Si DOI : 10.1088/1757-899X/27/1/012017
• 2011
  Non-equilibrium solidification, modelling for microstructure engineering of industrial alloys (NEQUISOL)
• 2011
  A Numerical Benchmark on the Prediction of Macrosegregation in Binary Alloys DOI : 10.1002/9781118062142.ch91
• 2011
  Containerless solidification and characterization of industrial alloys (NEQUISOL) DOI : 10.1088/1742-6596/327/1/012007
• 2011
  A method to determine the active particle nucleation undercooling distribution in a refined alloy DOI : 10.1088/1757-899X/27/1/012090
• 2011
  Investigation of columnar-to-equiaxed transition in solidification processing of AlSi alloys in microgravity - The CETSOL project DOI : 10.1088/1742-6596/327/1/012003
• 2011
  A numerical benchmark on the prediction of macrosegregation in binary alloys
• 2010
  Prediction of solidification paths for Fe-C-Cr alloys by a multiphase segregation model coupled to thermodynamic equilibrium calculations DOI : 10.2355/isijinternational.50.1859
• 2010
  Modeling and experimental characterization of the microstructure and grains structure of Al-7wt%Si directionally solidified
• 2010
  Erratum: Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys (International Journal of Thermal Sciences (2009) 48:11 (2013-2016)) DOI : 10.1016/j.ijthermalsci.2010.01.001
• 2010
  Experimental and numerical modeling of segregation in metallic alloys DOI : 10.1007/s11661-009-0141-6
• 2010
  Modeling of solidification: Grain structures and segregations in metallic alloys; [Modélisation de la solidification: Structures de grains et ségrégations des alliages métalliques] DOI : 10.1016/j.crhy.2010.07.010
• 2010
  CAFE modeling of segregation and structure in levitated droplets DOI : 10.4028/www.scientific.net/MSF.649.237
• 2010
  Droplet solidification of impulse atomized Al-0.61Fe and Al-1.9Fe DOI : 10.1179/cmq.2010.49.3.275
• 2010
  Modeling of heat and solute interactions upon grain structure solidification DOI : 10.4028/www.scientific.net/MSF.649.189
• 2010
  Erratum: Droplet solidification of impulse atomized Al-0.61Fe and Al-1.9Fe (Canadian Metallurgical Quarterly (2010) 49:3 (275-292))
• 2009
  Call for contributions to a numerical benchmark problem for 2D columnar solidification of binary alloys DOI : 10.1016/j.ijthermalsci.2009.07.024
• 2009
  Numerical modelling of columnar to equiaxed transition - Application to microgravity experiments DOI : 10.1179/136404609x367272
• 2009
  Microsegregation modeling of multiple phase transformations - Atomization of Al-Ni alloys
• 2009
  A solidification model for atomization DOI : 10.2355/isijinternational.49.992
• 2009
  Simulation of solidification grain structures with a multiple diffusion length scales model
• 2009
  A comparison of columnar-to-equiaxed transition prediction methods using simulation of the growing columnar front DOI : 10.1007/s11661-008-9708-x
• 2009
  A generalized segregation model for concurrent dendritic, peritectic and eutectic solidification DOI : 10.1016/j.actamat.2009.01.002
• 2008
  Materials solidification physics in space DOI : 10.1051/epn:2008502
• 2008
  Non-equilibrium and near-equilibrium solidification of undercooled melts of Ni- and Al-based alloys DOI : 10.1002/adem.200800022
• 2008
  Experimental and numerical modeling of equiaxed solidification in metallic alloys DOI : 10.1016/j.actamat.2008.02.041
• 2007
  Modeling of precipitate-free zone formed upon homogenization in a multi-component alloy DOI : 10.1016/j.actamat.2006.11.047
• 2007
  Interaction between single grain solidification and macrosegregation: Application of a cellular automaton-Finite element model DOI : 10.1016/j.jcrysgro.2006.12.076
• 2006
  Modeling of precipitate free zone in multicomponent aluminum alloys
• 2006
  Microsegregation modeling of rapidly solidified AL-CU droplets
• 2006
  Atomized droplet solidification as an equiaxed growth model DOI : 10.1016/j.actamat.2006.05.015
• 2006
  Modeling of macrosegregation and solidification grain structures with a coupled cellular automaton - Finite element model DOI : 10.2355/isijinternational.46.880
• 2006
  Columnar-to-Equiaxed Transition in SOLidification Processing (CETSOL): A project of the European Space Agency (ESA) - Microgravity Applications Promotion (MAP) programme DOI : 10.4028/0-87849-991-1.393
• 2006
  A comprehensive model for the description of microstructure evolution during solidification and homogenizaton of multicomponent aluminium alloys
• 2006
  Interactions between columnar solidification and segregation: A comparison of the predictions of a cafe model with in-situ observations
• 2006
  Segregation with spongy deformation of the mushy zone during solidification of the skin of steel cast products DOI : 10.4028/0-87849-991-1.175
• 2006
  Understanding the rapid solidification of Al-4.3Cu and Al-17Cu using X-ray tomography DOI : 10.1007/s11661-006-0170-3
• 2005
  Columnar-Equiaxed Transition in Solidification processing: The ESA-MAP CETSOL project DOI : 10.1007/bf02945939
• 2005
  Modeling of Dendritic Grain Formation During Solidification at the Level of Macro- and Microstructures DOI : 10.1002/3527603786.ch10
• 2004
  X-ray tomography study of atomized Al-Cu droplets DOI : 10.1179/cmq.2004.43.2.273
• 2004
  Experimental and modeling studies of the thermal conditions and magnesium, iron, and copper content on the morphology of the aluminum silicon eutectic in hypoeutectic aluminum silicon alloys DOI : 10.1007/s11661-004-0245-y
• 2004
  Contributions to the understanding of the formation of the skin during continuous casting of steel
• 2004
  A new cellular automaton - Finite element coupling scheme for alloy solidification DOI : 10.1088/0965-0393/12/3/013
• 2004
  Erratum: Segregation during solidification with spongy deformation of the mushy zone (Acta Materialia (2003) 51 (5263-5283)) DOI : 10.1016/j.actamat.2003.09.024
• 2004
  Modeling of macrosegregation and solidification grain structures with a coupled cellular automaton - Finite element model
• 2003
  Segregation during solidification with spongy deformation of the mushy zone DOI : 10.1016/S1359-6454(03)00379-3
• 2003
  A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification DOI : 10.1007/s11661-003-0311-x
• 2003
  Boundary layer correlation for dendrite tip growth with fluid flow DOI : 10.1016/S0921-5093(02)00261-7
• 2003
  Heat flow modeling of equiaxed solidification
• 2002
  Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys DOI : 10.1016/S1359-6454(01)00376-7
• 2002
  Modeling of precipitation coupled with thermodynamic calculations DOI : 10.4028/www.scientific.net/msf.396-402.747
• 2002
  Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys DOI : 10.1016/S1359-6454(01)00376-7
• 2001
  Stochastic modelling of dendritic grain structures
• 2001
  Stochastic modeling of dendritic grain structures DOI : 10.1002/1527-2648(200105)3:5303::AID-ADEM3033.0.CO;2-J
• 2001
  Stochastic modelling of dendritic grain structures DOI : 10.1051/metal:2001148
• 2001
  Stochastic modelling of dendritic grain structures DOI : 10.1051/metal:2001148
• 2001
  Stochastic modelling of dendritic grain structures DOI : 10.1179/026708301101510726
• 2000
  Modelling of solidification microstructures DOI : 10.4028/www.scientific.net/msf.329-330.389
• 2000
  Process modelling of grain selection during the solidification of single crystal superalloy castings DOI : 10.1016/S0921-5093(99)00701-7
• 2000
  EBSD characterisation and modelling of columnar dendritic grains growing in the presence of fluid flow DOI : 10.1016/S1359-6454(99)00413-9
• 2000
  Experimental study of the transition from constrained to unconstrained growth during directional solidification DOI : 10.2355/isijinternational.40.971
• 2000
  From constrained to unconstrained growth during directional solidification DOI : 10.1016/S1359-6454(00)00070-7
• 1999
  A three-dimensional cellular automaton-finite element model for the prediction of solidification grain structures DOI : 10.1007/s11661-999-0226-2
• 1997
  A 3D cellular automaton algorithm for the prediction of dendritic grain growth DOI : 10.1016/S1359-6454(96)00303-5
• 1997
  Prediction of a process window for the investment casting of dendritic single crystals DOI : 10.1016/S0921-5093(97)00081-6
• 1996
  Orientation dependence of primary dendrite spacing DOI : 10.1007/BF02652367
• 1996
  Modelling of as-cast structures DOI : 10.4028/www.scientific.net/msf.217-222.7
• 1996
  Prediction of grain structures in various solidification processes DOI : 10.1007/BF02648956
• 1996
  Analytical and numerical predictions of dendritic grain envelopes DOI : 10.1016/1359-6454(95)00433-5
• 1995
  Modeling of microstructure formation
• 1995
  Application of inverse methods to the estimation of boundary conditions and properties
• 1995
  Grain texture evolution during the columnar growth of dendritic alloys DOI : 10.1007/BF02647605
• 1995
  Stochastic Modelling of Solidification Grain Structures DOI : 10.2355/isijinternational.35.651
• 1995
  Process modelling and microstructure
• 1994
  A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes DOI : 10.1016/0956-7151(94)90302-6
• 1994
  3-Dimensional simulation of the grain formation in investment castings DOI : 10.1007/BF02651604
• 1994
  Stochastic Modeling of Grain Structure Formation in Solidification Processes DOI : 10.1557/S0883769400038811
• 1993
  Three-dimensional probabilistic simulation of solidification grain structures: Application to superalloy precision castings DOI : 10.1007/BF02657334
• 1993
  Probabilistic modelling of microstructure formation in solidification processes DOI : 10.1016/0956-7151(93)90065-Z

Direction(s) de thèse(s)

• 2025 Maîtrise de la fabrication de pièces monocristallines par procédé LPBF : modélisation de la croissance microstructurale par couplage automate cellulaire-éléments finis sur des volumes millimétriques GAMBLIN Axel
• 2025 Etude des transformations de phase à l'état solide rapides en combinant des expériences de chauffage par impulsion contrôlée et une modèlisation Calphad hors-équilibre de l'interface – RAPID-SOLID ADHAMI Mahmoud
• 2024 Thermochimie des poudres de couverture pour la coulée en lingot BELAICHA Noura
• 2023 Modélisation numérique de la précipitation et optimisation du traitement thermique "in-situ" du procédé de fusion laser sur lit de poudre pour applications aéronautiques DUCOTTET Sylvain
• 2022 Simulation multiphysique à l’échelle du cordon de la fabrication additive L-PBF de l’acier 316L : écoulements thermo-fluides, croissance des grains et viscoplasticité cristalline LI Zixuan
• 2022 Couplage entre la structure des grains et le comportement mécanique dans la modélisation macroscopique de la fabrication additive L-PBF VO Trung-Chien
• 2022 Procédé de fabrication additive laser-fil(WLAM) : simulation numérique multiphysique du transfert de chaleur, de l'écoulement des fluides et de la formation des microstructures. Application au superalliage IN718. KONG Zichen
• 2021 Modélisation multi-échelle de la solidification rapide et de la fissuration à chaud en fusion laser sur lit de poudre (L-PBF) de superalliages base nickel MARTIN Paul
• 2019 Etude thermo-mécanique de la solidification de produits réfractaires électrofondus à base d'alumine, de zircone et de silice HOUDARD Tiphaine
• 2019 Développements et applications d'une méthode numérique multi-échelle couplant les modèles d'automate cellulaire et de réseau d'aiguilles paraboliques pour la prédiction des structures de grains dendritiques WU Yijian
• 2019 Modélisation des microstructures générées en fabrication additive par procédé LPBF d'un alliage base nickel CAMUS Théophile
• 2018 Modélisation de la structure de grain et de la fissuration à chaud dans les procédés de soudage à l'arc XUE Chengdan
• 2018 Etude d'apparition de grains recristallisés dans les superalliages base nickel monocristallins pour application aux aubes de turbine HAZEMANN Emile
• 2018 Modélisation multi-échelles du procédé de fabrication additive par arc-fil WAAM : du cycle CMT aux pièces de grandes dimensions. RAVIX Lucas
• 2017 Modélisation multi-physique de la macroségrégation et de la formation des freckles lors de la solidification d’aubes de turbine monocristallines. MAGUIN Vincent
• 2016 Modélisation 3D de structures de grains par une approche automate cellulaire. Application à la compétition de croissance dendritique et à la cristallisation du silicium polycristallin PINEAU Adrian
• 2016 Modélisation numérique de la solidification des aciers fondus en lévitation dans la Station Spatiale Internationale AALILIJA Ayoub
• 2016 Simulation numérique des interactions mécaniques entre phase liquide et phase solide dans les procédés de solidification ZHANG Shaojie
• 2016 Modélisation numérique multi-échelle des structures desolidification, de la macroségrégation et de la TransitionColonnaire-Equiaxe ETTROUDI Hanadi
• 2015 Modélisation multi-échelle parallélisée pour la prédiction de structures de grains dendritiques couplant les éléments finis, un automate cellulaire et un réseau de paraboles FLEURISSON Romain