Siegfried Fouvry

Biographie

Publication(s)

• 2026
  Experimental and modelling investigation of fretting fatigue in crossed steel wire contacts: Influence of corrosive seawater and zinc cathodic protection DOI : 10.1016/j.triboint.2026.112253
• 2026
  Fracture toughness of fretting obtained TTS in Ti-6Al-4V by in situ notched beam test DOI : 10.1016/j.triboint.2025.111108
• 2026
  Fretting Wear of a 304L stainless steel in 200-bar pressurized hydrogen: A typical nodular third body structure DOI : 10.1016/j.wear.2025.206435
• 2025
  Prediction of fretting fatigue damage under variable loading blocks: Effect of plasticity DOI : 10.1016/j.ijfatigue.2025.109022
• 2025
  How transfer film formation in bronze/silver-graphite sliding contact drives its electrical performance DOI : 10.1016/j.wear.2025.205976
• 2025
  An elastoplastic analysis of fretting crack nucleation: Correlation between critical distance and grain size DOI : 10.1016/j.ijfatigue.2025.108854
• 2025
  Flow-induced fretting in DEMO divertor targets equipped with swirl tapes: Numerical investigation through one-way fluid-structure interaction simulations DOI : 10.1016/j.fusengdes.2025.115307
• 2025
  Influence of a copper interlayer on the electrical contact resistance of a nickel-silver-plated interface subjected to fretting wear DOI : 10.1016/j.wear.2025.205886
• 2025
  Closed-form solutions for simplified fretting wear profiles prediction incorporating an inverse identification of local wear rates DOI : 10.1016/j.wear.2025.205979
• 2025
  Scenario for the formation of fretting obtained TTS in TA6V from detailed microstructural analysis DOI : 10.1016/j.wear.2025.205834
• 2025
  Tribological investigation of new self-fluxing nickel alloys for high temperature application: The effect of silicon distribution on glaze layer formation DOI : 10.1016/j.wear.2024.205631
• 2025
  Synergic effect of grease and zinc coating against fretting fatigue damages in a crossed steel wire contact: application to offshore wind mooring ropes DOI : 10.1016/j.engfailanal.2025.109776
• 2024
  Effect of zinc coating on the fretting fatigue endurance of crossed steel wires DOI : 10.1016/j.wear.2024.205383
• 2024
  A reverse identification of the friction coefficient operating within crack lips through a complete elastoplastic simulation of 3D fretting fatigue cracks DOI : 10.1016/j.engfracmech.2024.110157
• 2024
  Influence of post-processing treatments on fatigue limit of notched additive manufactured Ti-6AL-4V determined by rapid thermographic methodology DOI : 10.1016/j.ijfatigue.2023.108034
• 2023
  Heterogeneity in tribologically transformed structure (TTS) of Ti–6Al–4V under fretting DOI : 10.1016/j.wear.2023.204680
• 2023
  Fretting-fatigue of shrink fit lug-bush assemblies: Interference-fit effect DOI : 10.1016/j.triboint.2023.108581
• 2023
  Influence of SiC particles orientation on fretting crack extension in an Al-SiC metal matrix composite DOI : 10.1016/j.engfracmech.2023.109091
• 2023
  Fretting tests for cyclic plastic law identification: Application to a 1XXX aluminium crossed wire contact DOI : 10.1016/j.triboint.2022.107958
• 2023
  Comparison between physical and machine learning modeling to predict fretting wear volume DOI : 10.1016/j.triboint.2022.107936
• 2023
  Experimental investigation of galling occurrence in sliding contact under high pressure of a manganese phosphate versus steel interface: Comparison of two greases DOI : 10.1016/j.wear.2023.204820
• 2023
  Surface morphology, contact size and contact geometry effects on grease-lubricated fretting contacts DOI : 10.1016/j.wear.2023.204687
• 2023
  Stability of the critical distance method for fretting cracking prediction: influence of microstructure and crack nucleation size DOI : 10.1016/j.triboint.2023.108570
• 2023
  A hybrid analytical-FEM 3D approach including wear effects to simulate fretting fatigue endurance: Application to steel wires in crossed contact DOI : 10.1016/j.triboint.2023.108713
• 2023
  Predicting fretting-fatigue endurance of rotating bending shrink-fitted assemblies using a sequential RUIZ-SWT approach: The effect of entrapped debris layer DOI : 10.1016/j.triboint.2023.108593
• 2023
  A global–local approach to predict the fretting-fatigue failure of clamped aluminum powerline conductors: From mono-contact crossed wires to full conductor vibrational tests DOI : 10.1016/j.engfailanal.2023.107073
• 2022
  An experimental investigation of galling phenomenon generated in an alternated sliding ring-on-ring interface: Application to a full-scale solid lubricant interface DOI : 10.1016/j.wear.2022.204457
• 2022
  Explicit formulations of adhesive wear extension in fretting interfaces applying the contact oxygenation concept DOI : 10.1016/j.wear.2021.204147
• 2022
  Friction energy wear approach DOI : 10.1016/B978-0-12-824096-0.00006-8
• 2022
  Modeling contact size effect on fretting wear: a combined contact oxygenation - third body approach DOI : 10.1016/j.wear.2021.204168
• 2022
  Influence of the relative humidity and H2S - SO2 polluted air on the fretting wear behavior of silver-plated electrical contacts DOI : 10.1016/j.wear.2022.204455
• 2022
  Fretting wear modeling of 3D and 2D Hertzian contacts with a third-body layer using a Winkler elastic foundation model DOI : 10.1016/j.triboint.2022.107493
• 2022
  INFLUENCE OF GREASE LUBRICATION ON FRETTING-FATIGUE DAMAGES OF STEEL WIRE ROPES DOI : 10.1115/OMAE2022-79102
• 2022
  Influence of a pre-existing glaze layer on the fretting-wear response of HS25 cobalt-based alloy subjected to various temperature conditions DOI : 10.1016/j.wear.2021.204144
• 2021
  Fretting wear analysis through a mechanical friction energy approach: Impact of contact loadings and ambient conditions DOI : 10.1016/B978-0-12-823765-6.00007-9
• 2021
  Micromechanical tensile test investigation to identify elastic and toughness properties of thin nitride compound layers DOI : 10.1016/j.surfcoat.2021.127303
• 2021
  Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts DOI : 10.1016/j.triboint.2021.107077
• 2021
  Modeling contact oxygenation and adhesive wear extension in axisymmetric flat circular fretting interfaces DOI : 10.1016/j.wear.2021.203822
• 2020
  Modeling the fretting fatigue endurance from partial to gross slip: The effect of debris layer DOI : 10.1016/j.triboint.2019.106069
• 2020
  Shear driven crack arrest investigation under compressive state: Prediction of fretting fatigue failure of aluminium strands DOI : 10.1016/j.ijfatigue.2020.105589
• 2020
  An experimental investigation of adhesive wear extension in fretting interface: Application of the contact oxygenation concept DOI : 10.1016/j.triboint.2020.106266
• 2020
  Understanding and formalization of the fretting-wear behavior of a cobalt-based alloy at high temperature DOI : 10.1016/j.wear.2020.203297
• 2020
  Modelling adhesive wear extension in fretting interfaces: An advection-dispersion-reaction contact oxygenation approach DOI : 10.1016/j.triboint.2020.106490
• 2020
  A multi-scale strategy to predict fretting-fatigue endurance of overhead conductors DOI : 10.1016/j.triboint.2019.106053
• 2019
  Fretting wear rate evolution of a flat-on-flat low alloyed steel contact: A weighted friction energy formulation DOI : 10.1016/j.wear.2018.12.022
• 2019
  Normal force and displacement amplitude influences on silver-plated electrical contacts subjected to fretting wear: A basic friction energy – contact compliance formulation DOI : 10.1016/j.wear.2018.12.010
• 2019
  The formation of a cobalt-based glaze layer at high temperature: A layered structure DOI : 10.1016/j.wear.2019.203101
• 2019
  A combined friction energy and tribo-oxidation formulation to describe the high temperature fretting wear response of a cobalt-based alloy DOI : 10.1016/j.wear.2019.01.023
• 2018
  Numerical methods for stress intensity factor ΔK calculations of fretting cracked interface DOI : 10.1016/j.triboint.2017.10.029
• 2018
  Effect of Lubrication on DC and RF Electrical Endurance of Gold Plated Contacts Subjected to Fretting Wear DOI : 10.1109/HOLM.2018.8611662
• 2018
  A tribo-oxidation abrasive wear model to quantify the wear rate of a cobalt-based alloy subjected to fretting in low-to-medium temperature conditions DOI : 10.1016/j.triboint.2018.04.032
• 2018
  Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches DOI : 10.1016/j.ijfatigue.2018.07.034
• 2018
  A new criterion to quantify the DC and RF electrical response of an electrical contact subject to fretting wear DOI : 10.1016/j.wear.2018.07.017
• 2018
  The Effects of Relative Humidity on the Fretting Wear Behavior of Silver-plated Electrical Contacts DOI : 10.1109/HOLM.2018.8611782
• 2018
  Influence of humidity on the endurance of silver-plated electrical contacts subjected to fretting wear DOI : 10.1016/j.surfcoat.2018.07.109
• 2018
  A dynamical FEA fretting wear modeling taking into account the evolution of debris layer DOI : 10.1016/j.wear.2018.07.018
• 2017
  Fretting wear of pure cobalt chromium and nickel to identify the distinct roles of HS25 alloying elements in high temperature glaze layer formation DOI : 10.1016/j.wear.2017.01.049
• 2017
  In situ fretting fatigue crack propagation analysis using synchrotron X-ray radiography DOI : 10.1016/j.ijfatigue.2016.12.024
• 2017
  Effect of fretting wear of connectors regarding phase noise of RF signal: Influence of sliding amplitude and gold coating thickness DOI : 10.1109/HOLM.2017.8088058
• 2017
  A non-collinear fretting-fatigue experiment to compare multiaxial fatigue criteria: critical shear plane strategy is better than invariant formulations DOI : 10.1016/j.triboint.2016.09.011
• 2017
  Identification of parameters influencing the glaze layer formation and stability at high temperature for a Waspaloy/René125 contact under fretting wear conditions DOI : 10.1016/j.wear.2017.07.008
• 2017
  Wear rate impact on Ti-6Al-4V fretting crack risk: Experimental and numerical comparison between cylinder/plane and punch/plane contact geometries DOI : 10.1016/j.triboint.2016.11.023
• 2017
  Contact size, frequency and cyclic normal force effects on Ti–6Al–4V fretting wear processes: An approach combining friction power and contact oxygenation DOI : 10.1016/j.triboint.2016.12.049
• 2017
  Fretting wear of low current electrical contacts: Quantification of electrical endurance DOI : 10.1109/HOLM.2017.8088056
• 2017
  Prediction of electrical contact resistance failure of Ag/Ag plated contact subjected to complex fretting-reciprocating sliding DOI : 10.1016/j.wear.2016.12.033
• 2017
  Prediction of sliding speed and normal force effects on friction and wear rate evolution in a dry oscillating-fretting PTFE/Ti-6Al-4V contact DOI : 10.1016/j.wear.2017.02.021
• 2017
  Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures DOI : 10.1016/j.wear.2017.09.015
• 2017
  Quantitative calorimetric analysis of the fretting damage: Construction of the elastic shakedown boundary DOI : 10.1016/j.ijfatigue.2016.10.018
• 2017
  A numerical simulation of fretting wear profile taking account of the evolution of third body layer DOI : 10.1016/j.wear.2017.01.063
• 2017
  Fretting wear of a nitrided 316L/304L contact subject to in-phase normal force fluctuation in dry and lithium-boron solution: An RP-friction energy wear approach DOI : 10.1016/j.wear.2017.01.075
• 2016
  Plasma-sprayed coatings: Identification of plastic properties using macro-indentation and an inverse Levenberg-Marquardt method DOI : 10.1016/j.mechmat.2016.03.003
• 2016
  Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments DOI : 10.1016/j.ijfatigue.2015.07.015
• 2016
  Nanocrystalline glaze layer in ceramic-metallic interface under fretting wear DOI : 10.1016/j.surfcoat.2016.07.100
• 2016
  Fretting fatigue crack propagation rate under variable loading conditions DOI : 10.3221/IGF-ESIS.35.27
• 2016
  Lifetime prediction methodology for variable fretting fatigue loading: Plasticity effect DOI : 10.1016/j.ijfatigue.2016.05.025
• 2016
  Fretting wear response of a nitrided 316L SS/304L SS interface: Effect of lithium/bore liquid environment DOI : 10.1016/j.surfcoat.2016.06.091
• 2016
  Stability of critical distance approach to predict fretting fatigue cracking: A "ℓopt-bopt" concept DOI : 10.1016/j.ijfatigue.2015.07.016
• 2016
  Investigation of grease behavior under simple and complex displacement amplitudes conditions DOI : 10.1016/j.triboint.2016.01.017
• 2016
  An experimental study of cracking processes generated in a contact subjected to fretting-fatigue loading under CO2 corrosive seawater environment
• 2015
  Reverse identification of short-long crack threshold fatigue stress intensity factors from plain fretting crack arrest analysis DOI : 10.1016/j.engfracmech.2014.11.001
• 2015
  A FEM fretting map modeling: Effect of surface wear on crack nucleation DOI : 10.1016/j.wear.2015.01.013
• 2015
  An energy-based approach to understand the effect of fretting displacement amplitude on grease-lubricated interface DOI : 10.1016/j.wear.2015.07.015
• 2015
  Influence of carbon-based solid lubricant on fretting wear response for alumina-based ceramics versus cobalt superalloy contact DOI : 10.1016/j.surfcoat.2015.07.043
• 2015
  A model for single asperity perturbation on lubricated sliding contact with DLC-coated solids DOI : 10.1016/j.triboint.2014.05.009
• 2015
  Semi-physical neural network model for fretting wear estimation DOI : 10.3233/IFS-141461
• 2015
  Experimental study of the stress gradient effect under fretting loading by full field measurement techniques DOI : 10.1016/j.wear.2014.12.007
• 2015
  Electrical fretting wear performance of new silver composite coatings DOI : 10.1109/HOLM.2015.7355111
• 2015
  Prediction of Fretting-fatigue Crack Nucleation Using a Surface Shear - Sliding Size Crack Analog Parameter DOI : 10.1016/j.proeng.2015.12.649
• 2015
  Prediction of the electrical contact resistance endurance of silver-plated coatings subject to fretting wear, using a friction energy density approach DOI : 10.1016/j.wear.2014.12.006
• 2015
  FEM modeling of crack nucleation and crack propagation fretting fatigue maps: Plasticity effect DOI : 10.1016/j.wear.2015.01.037
• 2015
  Effect of fretting wear damage in RF connectors subjected to vibration: DC contact resistance and phase-noise response DOI : 10.1109/HOLM.2015.7354950
• 2014
  Crack nucleation threshold under fretting loading by a thermal method DOI : 10.1016/j.triboint.2013.10.008
• 2014
  Introduction of a reverse simulation approach to identify the fatigue stress intensity factor crack arrest threshold from fretting cracking experiments DOI : 10.1016/j.triboint.2013.10.016
• 2014
  Fatigue stress ratio effect on fretting-fatigue crack nucleation: Comparison between multi-axial and uni-axial predictions DOI : 10.4028/www.scientific.net/AMR.891-892.903
• 2014
  Basic Principles of Fretting DOI : 10.1002/9780470017029.ch13
• 2014
  From uni- to multi-axial fretting-fatigue crack nucleation: Development of a stress-gradient-dependent critical distance approach DOI : 10.1016/j.ijfatigue.2013.05.016
• 2014
  An effective friction energy density approach to predict solid lubricant friction endurance: Application to fretting wear DOI : 10.1016/j.wear.2014.07.009
• 2014
  The electrical contact resistance endurance of heterogeneous Ag/Sn interfaces subjected to fretting wear
• 2014
  Crack nucleation threshold under fretting loading by a thermal method DOI : 10.1007/978-3-319-00876-9_4
• 2014
  Influence of scratches on the wear behavior of DLC coatings DOI : 10.1016/j.wear.2014.12.010
• 2014
  From fretting to connector vibration tests: A "transfer function" approach to predict electrical contact resistance endurance
• 2014
  Fracture mechanics of impacted laminated glass subjected to various fatigue stressing conditions DOI : 10.1016/j.engfracmech.2014.05.013
• 2014
  Introduction of a "principal stress-weight function" approach to predict the crack nucleation risk under fretting fatigue using FEM modelling DOI : 10.1016/j.ijfatigue.2013.11.009
• 2013
  Influence of large periodic sliding sequences on the electronical endurance of contacts subjected to fretting wear DOI : 10.1109/HOLM.2013.6651417
• 2013
  Introduction of a power law formulation to quantify the contact size effects on friction and wear responses of dry oscillating sliding contacts: Application to a chromium steel interface DOI : 10.1016/j.wear.2013.01.072
• 2013
  Introduction of a reverse simulation approach to identify the fatigue SIF crack arrest threshold from fretting cracking experiments
• 2013
  Stress gradient effect on the crack nucleation process of a Ti-6Al-4V titanium alloy under fretting loading: Comparison between non-local fatigue approaches DOI : 10.1016/j.ijfatigue.2013.03.005
• 2013
  Prediction of the fretting fatigue crack nucleation endurance of a Ti-6V-4Al/ Ti-6V-4Al interface: Influence of plasticity and tensile/shear fatigue properties DOI : 10.1016/j.proeng.2013.12.134
• 2013
  Application of plain fretting test to extract fatigue properties of materials DOI : 10.1016/j.wear.2013.01.022
• 2013
  Application of a non local fatigue stress gradient-weigth function approach to predict the crack nucleation risk induced by fretting fatigue
• 2013
  Experimental analysis and modeling of the crack arrest condition under severe plastic fretting fatigue conditions DOI : 10.1016/j.proeng.2013.12.132
• 2013
  Impact of synergic interactions between sliding frequency and a cyclic variation of normal force on Ti-6A1-4Y7 Ti-6A1-4V gross slip fretting wear response
• 2013
  Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy DOI : 10.1016/j.ijfatigue.2012.07.007
• 2013
  Application of the friction energy density approach to predict electrical contact endurance in a silver-plated coating subjected to fretting wear DOI : 10.1109/HOLM.2013.6651399
• 2012
  Stress gradient effect on the cracking process of a Ti-6Al-4V titanium alloy under fretting loading and comparison of non-local predicted nucleation approaches
• 2012
  Introduction of a "modified archard wear law" to predict the electrical contact endurance of thin plated silver coatings subjected to fretting wear DOI : 10.1109/HOLM.2012.6336604
• 2012
  Fretting fatigue cracking process of a Ti-10V-2Fe-3Al titanium alloy
• 2012
  Quantification of the electrical contact endurance of thin platted silver coatings subjected to fretting wear: Influence of coating thickness DOI : 10.1049/cp.2012.0649
• 2012
  Residual stress relaxation effects on the cracking and wear processes of shot peened Ti-6Al-4V titanium alloy under fretting fatigue loading
• 2011
  Effect of sandblasting substrate treatment on single lap shear strength of adhesively bonded PEEK and its composites
• 2011
  Effect of variable normal force and frequency on fretting wear response of Ti-6Al-4V contact DOI : 10.1016/j.wear.2011.01.060
• 2011
  Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables DOI : 10.1016/j.wear.2011.01.095
• 2011
  Pressure and temperature effects on Fretting Wear damage of a Cu-Ni-In plasma coating versus Ti17 titanium alloy contact DOI : 10.1016/j.wear.2011.06.008
• 2011
  Introduction of an exponential formulation to quantify the electrical endurance of micro-contacts enduring fretting wear: Application to Sn, Ag and Au coatings DOI : 10.1016/j.wear.2011.01.058
• 2011
  A non-local fatigue approach to quantify Ti10V2Fe3Al fretting cracking process: Application to grinding and shot peening DOI : 10.1016/j.triboint.2010.10.017
• 2011
  Contact fatigue and wear behaviour of bismaleimide polymer subjected to fretting loading under various temperature conditions DOI : 10.1016/j.triboint.2010.11.014
• 2010
  An indirect method based on fretting tests to characterize the elastic properties of materials: Application to an epoxy resin RTM6 under variable temperature conditions DOI : 10.1016/j.wear.2010.06.008
• 2010
  Effects of microstructure on the incipient fatigue and fretting crack processes in Al-Cu-Li alloys DOI : 10.1520/JAI102530
• 2010
  Effect of grinding and shot peening on the cracking process of a Ti-10V-2Fe-3Al titanium alloy solicited in fretting
• 2010
  Identification of fretting fatigue crack propagation mechanisms using acoustic emission DOI : 10.1016/j.triboint.2010.06.009
• 2010
  Stress gradient effect on crack initiation in fretting using a multiaxial fatigue framework DOI : 10.1016/j.ijfatigue.2010.06.004
• 2010
  A non local multiaxial fatigue approach to account for stress gradient effect applied to crack initiation in fretting DOI : 10.1520/JAI102526
• 2010
  Artificial intelligence as efficient technique for ball bearing fretting wear damage prediction DOI : 10.1016/j.wear.2009.08.016
• 2010
  Fretting wear of stainless steels under variable temperature conditions: Introduction of a 'composite' wear law DOI : 10.1016/j.wear.2009.08.029
• 2010
  Characterization of crack nucleation in TA6V under fretting-fatigue loading using the potential drop technique DOI : 10.1016/j.ijfatigue.2010.03.008
• 2010
  Introduction of a new sliding regime criterion to quantify partial, mixed and gross slip fretting regimes: Correlation with wear and cracking processes DOI : 10.1016/j.wear.2010.05.002
• 2010
  A friction energy approach to quantifying lubrication under fretting sliding DOI : 10.1002/ls.105
• 2010
  Interface roughness effect on friction map under fretting contact conditions DOI : 10.1016/j.triboint.2010.02.010
• 2009
  A fast methodology to quantify electrical-contact behaviour under fretting loading conditions DOI : 10.1016/j.wear.2009.06.031
• 2009
  Impact of the nickel interlayer on the electrical resistance of tin-tin interface submitted to fretting loading DOI : 10.1016/j.surfcoat.2008.12.008
• 2009
  Fretting wear damage of HexTOOL™ composite depending on the different fibre orientations DOI : 10.1088/1757-899X/5/1/012019
• 2009
  Effect of normal force on fretting wear mechanisms of a ti/cuniln contact: A tribochemical approach
• 2009
  Impact of contact size and complex gross-partial slip conditions on Ti-6Al-4V/Ti-6Al-4V fretting wear DOI : 10.1016/j.triboint.2008.08.005
• 2009
  Tribochemistry of a Ti alloy under fretting in air: Evidence of titanium nitride formation DOI : 10.1007/s11249-009-9426-6
• 2009
  Development of a fretting-fatigue mapping concept: The effect of material properties and surface treatments DOI : 10.1016/j.wear.2009.09.012
• 2009
  Contact size effect on fretting wear behaviour: Application to an AISI 52100/AISI 52100 interface DOI : 10.1002/ls.74
• 2009
  Fretting-fatigue behaviour of bridge engineering cables in a solution of sodium chloride DOI : 10.1016/j.wear.2008.12.107
• 2009
  Introduction of a fretting-fatigue mapping concept: Development of a dual crack nucleation - crack propagation approach to formalize fretting-fatigue damage DOI : 10.1016/j.ijfatigue.2008.09.002
• 2009
  A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts DOI : 10.1016/j.wear.2008.12.013
• 2009
  Quantitative and qualitative study on the cracking in Ti-6Al-4V material under fretting-fatigue solicitations
• 2008
  A methodological approach ball bearing damage prediction under fretting wear conditions DOI : 10.1109/IS.2008.4670497
• 2008
  Prediction of fretting crack propagation based on a short crack methodology DOI : 10.1016/j.engfracmech.2007.06.011
• 2008
  High temperature fretting wear of a Ti alloy/CuNiIn contact DOI : 10.1016/j.surfcoat.2008.08.043
• 2008
  Fretting wear of a TiN PVD coating under variable relative humidity conditions-development of a 'composite' wear law DOI : 10.1016/j.surfcoat.2007.07.103
• 2008
  On fretting of XC38 steel: Surface treatments effect DOI : 10.1179/175158308X324940
• 2008
  Finite element modelling of fretting wear surface evolution: Application to a Ti-6A1-4V contact DOI : 10.1016/j.wear.2007.01.037
• 2007
  Numerical prediction of fretting contact durability using energy wear approach: Optimisation of finite-element model DOI : 10.1016/j.wear.2007.01.116
• 2007
  A global-local wear approach to quantify the contact endurance under reciprocating-fretting sliding conditions DOI : 10.1016/j.wear.2007.01.072
• 2007
  Application of an energy wear approach to quantify fretting contact durability: Introduction of a wear energy capacity concept DOI : 10.1016/j.triboint.2007.02.011
• 2007
  Systematic approach for morphological analysis of worn surfaces DOI : 10.1002/tt.40
• 2007
  Three-dimensional study of a fretting crack using synchrotron X-ray micro-tomography DOI : 10.1016/j.engfracmech.2006.06.019
• 2006
  Experimental and numerical analysis of local and global plastic behaviour in fretting wear DOI : 10.1016/j.triboint.2006.02.023
• 2006
  Palliatives in fretting: A dynamical approach DOI : 10.1016/j.triboint.2006.02.038
• 2006
  Development of a contact compliance method to detect the crack propagation under fretting DOI : 10.1016/j.triboint.2006.02.015
• 2006
  Behaviour of shot peening combined with WC-Co HVOF coating under complex fretting wear and fretting fatigue loading conditions DOI : 10.1016/j.surfcoat.2006.08.094
• 2006
  Fretting wear of Ti(CxNy) PVD coatings under variable environmental conditions DOI : 10.1243/13506501JET139
• 2006
  Comparison of shot peening and nitriding surface treatments under complex fretting loadings DOI : 10.4028/0-87849-400-6.105
• 2006
  Determination and prediction of the fretting crack initiation: introduction of the (P, Q, N) representation and definition of a variable process volume DOI : 10.1016/j.ijfatigue.2005.09.005
• 2006
  Prediction of the crack extension under fretting wear loading conditions DOI : 10.1016/j.ijfatigue.2006.01.002
• 2006
  Characterisation of fretting fatigue damage using synchrotron X-ray micro-tomography DOI : 10.1016/j.triboint.2006.02.047
• 2005
  Hard coatings durability under fretting wear DOI : 10.1016/s0167-8922(05)80067-7
• 2005
  Prediction of the coating durability under oscillating sliding contact : INTRODUCTION of a local energy density parameter DOI : 10.1115/wtc2005-64044
• 2005
  A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings DOI : 10.1016/j.wear.2005.01.030
• 2005
  Prediction of cracking in Ti-6Al-4V alloy under fretting-wear: Use of the SWT criterion DOI : 10.1016/j.wear.2004.11.026
• 2005
  Development of a Wöhler-like approach to quantify the Ti(C xNy) coatings durability under oscillating sliding conditions DOI : 10.1016/j.wear.2005.02.071
• 2005
  Wear kinetics of Ti-6Al-4V under constant and variable fretting sliding conditions DOI : 10.1016/j.wear.2005.01.034
• 2005
  A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume DOI : 10.1016/j.ijfatigue.2004.09.001
• 2005
  Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions DOI : 10.1016/j.triboint.2004.06.002
• 2005
  Experimental and modelling aspects of abrasive wear of a A357 aluminium alloy under gross slip fretting conditions DOI : 10.1016/j.wear.2004.04.010
• 2004
  A quantitative approach of Ti-6Al-4V fretting damage: Friction, wear and crack nucleation DOI : 10.1016/j.wear.2004.05.011
• 2004
  Written discussion - Contributions
• 2004
  Fretting wear analysis of TiC/VC multilayered hard coatings: Experiments and modelling approaches DOI : 10.1016/j.wear.2004.02.009
• 2003
  Impact of contact size and geometry on the lifetime of a solid lubricant DOI : 10.1016/S0043-1648(03)00157-1
• 2003
  Friction damage of aluminium alloys DOI : 10.1108/00368790310496428
• 2003
  The effect of diffusion treatments in a glow-discharge plasma in Ar+O2 atmosphere on friction and wear of Ti-6Al-4V alloy DOI : 10.1016/S0042-207X(02)00640-1
• 2003
  Fretting maps for anodised aluminium alloys DOI : 10.1016/S0040-6090(03)00002-6
• 2003
  Fretting wear behavior of a Cu-Ni-In plasma coating DOI : 10.1016/S0257-8972(02)00639-4
• 2003
  Impact of variable loading conditions on fretting wear DOI : 10.1016/S0257-8972(02)00643-6
• 2003
  An energy description of wear mechanisms and its applications to oscillating sliding contacts DOI : 10.1016/S0043-1648(03)00117-0
• 2003
  Correlation between fretting situation and the contact resistivity of electrical connections
• 2002
  Wear analysis of A357 aluminium alloy under fretting DOI : 10.1016/S0043-1648(02)00116-3
• 2002
  A global methodology to quantify fretting damages
• 2002
  Prediction of crack nucleation under partial slip fretting conditions DOI : 10.1243/030932402320950152
• 2001
  An energy description of hard coating wear mechanisms DOI : 10.1016/S0257-8972(00)01161-0
• 2001
  Kinetics of fretting wear of TiC/VC coatings on M2 HSS steel DOI : 10.1106/152451102025828
• 2001
  Elastic-plastic shakedown analysis of fretting wear DOI : 10.1016/S0043-1648(00)00508-1
• 2001
  The fretting sliding transition as a criterion for electrical contact performance DOI : 10.1016/S0043-1648(01)00685-8
• 2001
  Effect of shot peening on the freeting wear of Ti-6Al-4V DOI : 10.1016/S0043-1648(01)00671-8
• 2001
  Shakedown analysis and fretting wear response under gross slip condition DOI : 10.1016/s0043-1648(01)00767-0
• 2001
  Kinetics of fretting wear of TiC/VC coatings on M2 HSS steel DOI : 10.1109/WBL.2001.946578
• 2000
  Tribologically transformed structure in fretting DOI : 10.1016/S0043-1648(00)00464-6
• 2000
  Description of fretting damage by contact mechanics DOI : 10.1002/zamm.20000801311
• 2000
  Multiaxial fatigue analysis of fretting contact taking into account the size effect
• 2000
  Fretting-wear and fretting-fatigue: Relation through a mapping concept DOI : 10.1520/stp14721s
• 1999
  Prédiction de l'amorçage dans on contact soumis à la sollicitation de fretting DOI : 10.1051/metal/199996091131
• 1998
  Developments of fretting sliding criteria to quantify the local friction coefficient evolution under partial slip condition DOI : 10.1016/s0167-8922(98)80071-0
• 1998
  Identification of the characteristic length scale for fatigue cracking in fretting contacts DOI : 10.1051/jp4:1998820
• 1997
  Fretting behaviour of TiN coatings DOI : 10.1179/sur.1997.13.3.227
• 1997
  Wear analysis in fretting of hard coatings through a dissipated energy concept DOI : 10.1016/S0043-1648(96)07436-4
• 1996
  Fretting behaviour of TiN and Me:CH coatings in dry air and argon
• 1996
  Third body effects in fretting DOI : 10.1016/s0167-8922(08)70769-7
• 1996
  Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions DOI : 10.1016/0043-1648(95)06741-8
• 1996
  Stress and fatigue analysis of fretting on a stressed specimen under partial slip conditions DOI : 10.1002/tt.3020030103
• 1996
  Quantification of fretting damage DOI : 10.1016/S0043-1648(96)07306-1
• 1995
  Analysis of sliding behaviour for fretting loadings: determination of transition criteria DOI : 10.1016/0043-1648(94)06582-9
• 1994
  Fretting behaviour of hard coatings under high normal load DOI : 10.1016/0257-8972(94)90207-0

Direction(s) de thèse(s)

• 2025 Caractérisation et modélisation de l’endommagement des rotors bobinés sous sollicitation thermomécanique : usure et endommagement des isolants ROSSI Maminirina Alyssa Cynthia
• 2025 Développement d’un modèle prédictif d’usure pour les problématiques de fretting des assemblages de combustible nucléaire MOREIRA LEVY Marjory
• 2025 Étude expérimentale et modélisation de l’usure et du frottement d’alliages métalliques (TA6V, 316L) sous hydrogène RENOU Hana
• 2024 Modélisation de l’amorçage et de la propagation des fissures induites par des sollicitations de fretting fatigue FOURCIN Morgan
• 2023 Etude expérimentale et modélisation des phénomènes tribologiques (usure et frottement) sous H2g FARTAS Mohammed
• 2022 Etude du comportement en fretting fatigue corrosion des brins d'acier et d'aluminium des conducteurs aériens pour transport d'énergie MEDRALA Clément